Trad Gang
Main Boards => PowWow => Topic started by: Goke on May 05, 2009, 10:25:00 AM
-
I am looking at wood choices for a new bow. I want a set of dark limbs but still want to use wood. Anyone have some photos of good dark wood veneers. Possibly ebony, zircote, etc.?
-
Well I just did a bow with the darkest Walnut I've found in the limbs under clear glass. A rich dark brown. It looks really classy. I mixed in Bocote in the riser, limb bolt overlays and limb tips to give it some bling. I could email you some photos later tonight or tomorrow when I have more time. Sounds like you may be looking for a black though. You also have the option of using a dye of your choice on any wood really.
-
Thanks Randy, Love to see the photos.
-
What about these ones? Ziricote under clear glass, some with footing.
(http://i94.photobucket.com/albums/l118/V-Archer/R-D%20bow%20Don%20Montgomery/limb-ziricote-1.jpg)
(http://i94.photobucket.com/albums/l118/V-Archer/bow%20for%20Jim/footedlimb-1.jpg)
(http://i94.photobucket.com/albums/l118/V-Archer/Bow%20for%20John%20Reck/limb3-1.jpg)
-
I have some walnut burl that will blow your mind.
It is dark brown.
-
Here's some Ebony:
(http://i23.photobucket.com/albums/b351/osminski/MacassarEbony.jpg)
-
One thing to consider is the tendency for dark woods to show any cosmetic flaws in the glass. I can live with a streak here and there but some folks can't. For that reason alone some cringe to go with a dark veneer (just what I've been told). It's also important to remember that the bowyer doesn't have much input on the glass manufacturers cosmetic quality control, although I know plenty have tried.
-
(http://i76.photobucket.com/albums/j2/stevet_01/photo-8.jpg)
Indonesian rosewood
-
My bow (Border GL) is actually glassless but has carbon lams instead. I don't worry about scratches anyway though.
-
(http://i235.photobucket.com/albums/ee104/mooseman76/psax004.jpg)
Here is some Bolivian Rosewood...Mike
-
Somethin a little different,stained curly maple...
(http://i32.photobucket.com/albums/d34/kennym/101_1908.jpg)
-
The lighter set is Zebrawood and the darker set is Bolivian Rosewood. Both on Pittsley Predators.
(http://i39.photobucket.com/albums/e173/Yellowdog3822/P2010594.jpg)
-
thanks everyone. I think I just made my decision harder!
-
There's always Cocobolo, Macassar Ebony, Gaboon Ebony and Wenge veneers to consider! :) And you could look at the limbs listed on RER's website for more ideas.
http://www.rerbows.com/limbs.htm
I think the curly claro walnut would be mind boggling!
Bill
-
I have Rose Oak bow with Ziricote veneers. I tried to take some pictures last night, but I sure cannot figure out the lighting...I'll try again tonight, but in the meantime you might be able to see a semi-decent picture here:
http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=062603
-
Thanks all. this has been very helpful.
-
Good ole homegrown black walnut makes a sweet looking veneer:
(http://i136.photobucket.com/albums/q176/akinslow/DSC04993.jpg)
-
Stoney, I like that walnut you have there, very nice.