How many grain run outs are acceptable in an arrow? I am making some arrows from a board for the first time and looking for suggestions. Most of the board had very straight grain but some arrows will have a few run outs.
What type of wood are you using for arrows? Does the run-outs cross the the shaft and feather out on the opposite side? If so, what's the distant? Remember, the more perfect the material the more perfect the arrow. Plenty of suitable boards to be had, so choose carefully.
ART B
The board is popular. Most of the run outs are over several inches and not all the way through the shaft. If they run all the way through the shaft how long should the grain be (6"?) to be OK?
Poplar is tougher than most folks think. That's my preferred shaft material. It's always best (and safe) to have at least some growth ring run from tip to tip. Six inch cross over in growth ring would NOT be safe (in my opinion) in any arrow shaft. Two thirds of the shaft is my minimum.
ART B
I read somewhere that anything over 20" is considered a premium shaft, these days. Sad, but true.
What is safe, I couldn't tell you, but I'd hold to the 20" standard if it was me.
Art B has probably made more shafts than most, so you can take his advice to the bank.
Thanks guys . I am new to this wood arrow building and have not done much wood work of any kind. Just can't help but want to build some of my archery equipment.