Trad Gang

Main Boards => PowWow => Topic started by: saltwatertom on April 22, 2009, 11:54:00 AM

Title: broadhead holder
Post by: saltwatertom on April 22, 2009, 11:54:00 AM
Is there such a thing as a broadhead holder case for individual broadheads? I haven't seen anything like this any where for sale. What I have envisioned is a small plastic case that would hold one head so it can be carried in a pocket or a pack, safely. Putting a sharp broadhead in my pocket seems a little out of the question!  :eek:    :scared:  
 
I like to carry a blunt on one of the arrows in my bow quiver and an extra (or 2 ) broadheads in case  I dull one on a missed shot or need the arrow with the blunt for a broadhead.
 
Maybe one of our sponsors will come up with some thing like this if it doesn't exist. already?
Title: Re: broadhead holder
Post by: WestTnMan on April 22, 2009, 01:18:00 PM
Haven't seen one before but you could get a band aid box and put a piece of foam it the bottom. I store mine after season in a small box with foam in it.
Title: Re: broadhead holder
Post by: Orion on April 22, 2009, 01:27:00 PM
I wrap an extra broadhead in a piece of leather and rubber band the leather so it won't unfold and put the head in a small plastic bag with other things like fire starter, string, an extra compass, etc., in my backpack
Title: Re: broadhead holder
Post by: Over&Under on April 22, 2009, 02:44:00 PM
Black widow has some on their site, well the last time I looked they were, and I think I saw them in the catalogue as well.  They were for 2 blade heads if I remember correctly.
Title: Re: broadhead holder
Post by: NewtoTrad2008 on April 22, 2009, 03:31:00 PM
If they are a two blade Alaska Bowhunting (sponsor) has them, it holds three blades, here's a link.
 http://www.alaskabowhunting.com/Broadheads-C15.aspx
Title: Re: broadhead holder
Post by: saltwatertom on April 22, 2009, 03:33:00 PM
Thanks fot the tip, looked on the BW site, but didn't see one. I would like one for Woodsman (3 blade) heads also.
Title: Re: broadhead holder
Post by: saltwatertom on April 22, 2009, 09:01:00 PM
Just checked out Boggs leather and they build some nice holders for 2 blade but not for 3 blade, so far any way.
Title: Re: broadhead holder
Post by: ChuckC on April 22, 2009, 09:03:00 PM
a piece of electricians tape on each blade will protect it and you if you carry it as a spare.
ChuckC
Title: Re: broadhead holder
Post by: Fletcher on April 22, 2009, 11:02:00 PM
You could probably make a pretty good one from some PVC tube or a couple of 35mm film containers (remember those) taped together.