Print Page - FOC % Question

Title: FOC % Question
Post by: Recurve50 LBS on April 21, 2009, 01:37:00 AM

Ok guys,

I found the length of my arrow measuring from the base of the nock groove to the very front tip of the point. Measurement was 30 1/2" . The center of the arrow is 15 1/4" Then I found the pivot point and measured from the center point. That measured 5" . Now how do I do the math to figure out the FOC % ? I never was very good with math when I was in school.

Thanks Gang

--------------------
Larry W.

Member TANJ

NRA Life Member

62" 45#@28" Turkey Creek Longbow
56" 45#@28" Thunder Stick Mag

Title: Re: FOC % Question
Post by: Wolfkiss on April 21, 2009, 05:45:00 AM

http://home.att.net/~sajackson/archery9.html

Hi, Pop your measurments into the calculator on the above link.

Andy.

Title: Re: FOC % Question
Post by: tiur on April 21, 2009, 07:27:00 AM

Try this,

5/30,5 = .1639 ( 16.4%)

ASL

Title: Re: FOC % Question
Post by: Recurve50 LBS on April 21, 2009, 09:43:00 AM

Thank you guys. My brain has brain farts from time to time when it comes to math.

Trad Gang

Main Boards => PowWow => Topic started by: Recurve50 LBS on April 21, 2009, 01:37:00 AM