Trad Gang

Main Boards => PowWow => Topic started by: Cottonmouth on April 09, 2009, 11:50:00 AM

Title: String Stretch and brace ht.
Post by: Cottonmouth on April 09, 2009, 11:50:00 AM
I set my brace height, and 24 hrs. later it had decreased by almost half an inch. This string has been on my bow for two years, and has always had this problem.  I haven't shot it alot, but I've left it strung for over six months.  By that time, the bow looked unbraced.  I would've thought that would take all the stretch out of the string, but evidently not.  Do I need a new string?  Suggestions?

Cottonmouth
Title: Re: String Stretch and brace ht.
Post by: SCATTERSHOT on April 09, 2009, 12:04:00 PM
Any new string will stretch a little, but that's excessive, for sure. I think I'd just get a new string. When I make a new string, I brace the bow with it, and apply pressure to the tips to get the initial stretch out of it and then leave it strung overnight. That usually takes care of the problem.
Title: Re: String Stretch and brace ht.
Post by: JRY309 on April 09, 2009, 12:36:00 PM
I would replace a string that keeps stretching like you described.What type of string is it,a dacron or FF type material? A dacron string will stretch the most but I half to think something is going wrong with that string on your bow.
Title: Re: String Stretch and brace ht.
Post by: Jason Jelinek on April 09, 2009, 01:06:00 PM
Get a new string, it shouldn't do that.
Title: Re: String Stretch and brace ht.
Post by: LBR on April 09, 2009, 03:16:00 PM
Quote...I've left it strung for over six months. By that time, the bow looked unbraced.
Get a new string.  Regardless of the material, it shouldn't stretch that much.  Sounds like the loops are slipping and/or a bad spool of string material.

The only materials I've heard of stretching anywhere near that much aren't sold anymore.

Chad
Title: Re: String Stretch and brace ht.
Post by: Cottonmouth on April 09, 2009, 04:38:00 PM
thanks gang, gonna start looking for a new one!
Title: Re: String Stretch and brace ht.
Post by: NoCams on April 09, 2009, 09:19:00 PM
Cottonmouth,
Look no further than LBR who posted above you ! He is one of the best string makers in the biz. Best service and product around. Lots of others on here too I have heard about.


nocams  :thumbsup: