Trad Gang

Main Boards => PowWow => Topic started by: GMMAT on March 30, 2009, 06:53:00 PM

Title: Best nocks for CX Heritage arrows????
Post by: GMMAT on March 30, 2009, 06:53:00 PM

Not fond of the std nocks.  I think I'm using Easton nocks in the ones I shoot, currenty, but I'm unsure of the make, actually.

Title: Re: Best nocks for CX Heritage arrows????
Post by: dino on March 30, 2009, 07:01:00 PM

Jeff,
I replace them with Bohning signature nocks, not sure if that is the best but I'm happy with them. dino

Title: Re: Best nocks for CX Heritage arrows????
Post by: Huntrdfk on March 30, 2009, 07:13:00 PM

I like the Easton 3D Super Nocks.....


David

Title: Re: Best nocks for CX Heritage arrows????
Post by: oldskool on March 30, 2009, 07:24:00 PM

What Huntrdfk said. They fit my string perfectly and works better than any thing else I tried

Title: Re: Best nocks for CX Heritage arrows????
Post by: ken denton on March 30, 2009, 07:25:00 PM

I use Gold Tip 3555 for my cx150 and they never move! Ken

Title: Re: Best nocks for CX Heritage arrows????
Post by: R H Clark on March 30, 2009, 07:56:00 PM

I've been using the Accunocks.I really like them so far.

Title: Re: Best nocks for CX Heritage arrows????
Post by: Bill Kissner on March 30, 2009, 08:18:00 PM

I too prefer the Goldtip nocks. They insert farther into the shaft and also fit tighter.

Title: Re: Best nocks for CX Heritage arrows????
Post by: Paul Mattson on March 30, 2009, 08:29:00 PM

You can also use nock adapters and glue on a 5/16" Bohning Classic nock.  Plus they look great.

Title: Re: Best nocks for CX Heritage arrows????
Post by: J.Williams on March 30, 2009, 08:57:00 PM

Gold Tip and Bohning Signature nocks for me too.

Title: Re: Best nocks for CX Heritage arrows????
Post by: Leo L. on March 30, 2009, 09:09:00 PM

This is good news.  I didn't know the nocks could actually be replaced with anything other than a CX TCX nock.  Those are really tight.  I guess I'll be buying some new ones now.

Title: Re: Best nocks for CX Heritage arrows????
Post by: JRY309 on March 31, 2009, 12:09:00 AM

I'll second Easton 3D Super nocks,I use them in all my standard size carbons.I use them in CX Heritage,Carbonwood,Beman ICS and GT's.They have the largest and deepest throat of those types of nocks.I also use them in my aluminums with uni-bushings.