Print Page - How do I attach coyote hide to a back quiver?

Title: How do I attach coyote hide to a back quiver?
Post by: Horner on March 01, 2009, 07:27:00 PM

Wanting to put a tanned coyote face on my leather back quiver? How would you attach it? Any help would be great.
Thanks,
Horner

Title: Re: How do I attach coyote hide to a back quiver?
Post by: CO_Redneck on March 01, 2009, 08:55:00 PM

Depending on what your quiver is made out of, I would use artifical sinew. Works great!

Title: Re: How do I attach coyote hide to a back quiver?
Post by: pronghorn23 on March 01, 2009, 09:42:00 PM

Barge cement is supposed to work great for glueing leather to leather. Maybe glue it on and stitch down the edges?

Title: Re: How do I attach coyote hide to a back quiver?
Post by: Horner on March 01, 2009, 09:51:00 PM

Barge Cement where do you get it?
Thanks,
Horner

Title: Re: How do I attach coyote hide to a back quiver?
Post by: EricW on March 01, 2009, 09:59:00 PM

Just about any craft store should have it. If you have a hobby lobby close by thats where I got mine.

Title: Re: How do I attach coyote hide to a back quiver?
Post by: Horner on March 01, 2009, 10:03:00 PM

Thanks

Title: Re: How do I attach coyote hide to a back quiver?
Post by: Dick in Seattle on March 01, 2009, 10:47:00 PM

I made a side quiver this winter that I covered with hair on cowhide. I used spray fabric glue from my wife's upholstery shop. She buys it from the suppler but they sell it at Home Depot. You spray both sides, give it about 4 to 5 minutes and then stick the sides together. It adheres well and stays pretty flexible.

Title: Re: How do I attach coyote hide to a back quiver?
Post by: MYSTIKBOW on March 01, 2009, 11:00:00 PM

I've made several quivers using Elmers Craft bond spray adhesive. Another GOOD line of very strong spray adhesives is made be 3M. They can be a little pricey but when I want somthing to stick together for good thats the stuff I use.

Title: Re: How do I attach coyote hide to a back quiver?
Post by: Roy Steele on March 02, 2009, 01:48:00 AM

Any good glue or cement will do.I've used elmers.After I sanded [100 grit]the hide and leather quiver good and added glue.I wraped with ace bandge an let dry.I've done a few an never had one come off.Did one with squrrils,a dog coyote,and two deer.

Title: Re: How do I attach coyote hide to a back quiver?
Post by: Horner on March 02, 2009, 08:24:00 AM

Thanks everyone,
Horner

Trad Gang

Main Boards => PowWow => Topic started by: Horner on March 01, 2009, 07:27:00 PM