Not long ago I saw a post on here about an arrow company comming out with some 600 spine carbon arrows. Did that happen and where can I find them? Thanks
Easton Redlines come in that spine I just got some for my fita bow. Supposedly carbons in this spine can be quite weak so I wouldnt use them for anything but targets.
We have a new Carbon Express .600 spine in stock in limited quantities. Not even on the site yet.
They are CE Predator II's 20/40's (.600), shafts run $49.99 a dozen.
PM or e-mail if I can assist you in any way.
Tim
Gold Tip 1535 is coming out soon. I'm sure SipsyRiver will be here soon to answer your questions.
Easton ST epics
Gold Tip Ultra Light
Beman ICS Energy
Carbon Tech has .650
Easton ST Epic 600 are good shafts for the money and readily available.
C ya
Blacky
Entrada from Gold tip been out quite a while. I shot them off a few bows 35-45#s with 125 to 175 up front cut to 29"s. Shawn
Shawn, I've been shhoting the 600 Entratdas for a while and have had 3 break on entering deer and 1 on a small hog. Did you ever have any problems with these. I shoot 29" 100 grain brass insert and 125 grain head, 45# recurve @ my draw length. I put 29" of 3/16 poly rope inside to bring them up to 8.2 gpi also. They bare shaft the same as my fletched broadheads and field points. I think I'll try the 1535 when they come out.
I footed mine with 2"s of aluminum and shot the Muzzy shoot with them. This shoot is the hardest I know of on arrows. I believe I broke 3 in two days of shooting, which is pretty good! Shawn
The wall thickness on the 600 Entradas is around .017". The 1535 Trads are supposed to be .025", or about the same as the 3555 shafts. I believe the main intent was to increase GPI, but it should improve strength at the same time.
I picked up some Entradas in 600 spine and they have been shooting great. I only use these on my target limbs 42#'s and so far I'm very impressed with them. I havent chrono'd them yet but they are quick and are still 7.3gpp.
Gold Tip has a black shaft that is .600 and a new woodgrain finish (1535 Traditional).
The 1535 may be available later this week or next week. The 1535 will weigh about 8.3 gr/inch.