Trad Gang

Main Boards => PowWow => Topic started by: bshunter on February 28, 2009, 10:00:00 AM

Title: lighted nocks for CX heritage 90's
Post by: bshunter on February 28, 2009, 10:00:00 AM

Anyone know the inside diameter of the CX Heritage 90's, I want to use lighted nocks...wondering if any of the easton sizes might work? Thanks.

Title: Re: lighted nocks for CX heritage 90's
Post by: Smallwood on March 01, 2009, 11:37:00 AM

try e-mailing cx with the question.
also, cx makes lighted nocks for standard sized carbons, don't know if they will fit the 90s.

Title: Re: lighted nocks for CX heritage 90's
Post by: JRY309 on March 01, 2009, 12:33:00 PM

CX Heritage 90's are slightly smaller then the standard 5/16" carbon,they use their own nocks and inserts.They are close to 9/32",the only Easton that might work would be the newer ST Epic's they are 9/32",I've seen lighted nocks for them.

Title: Re: lighted nocks for CX heritage 90's
Post by: Tajue17 on March 01, 2009, 01:08:00 PM

Quote

Originally posted by Smallwood:
try e-mailing cx with the question.
also, cx makes lighted nocks for standard sized carbons, don't know if they will fit the 90s.

they will work but you have to put them in a drill and run the drill slow while pressing gently on the insert with a file or emery board to bring the diameter down..

Title: Re: lighted nocks for CX heritage 90's
Post by: Lechwe on March 01, 2009, 08:08:00 PM

Look up firenocks. Probably the best lighted nocks out there.

Title: Re: lighted nocks for CX heritage 90's
Post by: James Wrenn on March 01, 2009, 08:46:00 PM

The Easton H nocks should work in them.That is what fits the Epic shafts of same size.You can buy luminocks in that size and they should work just fine.