Trad Gang

Main Boards => PowWow => Topic started by: Chub on February 21, 2009, 08:41:00 PM

Title: arrow tuning borderline weak/stiff
Post by: Chub on February 21, 2009, 08:41:00 PM
im looking for some guidance my setup is a 60in 54lb at[27IN] recurve bob lee td hunter got arrows are 500axis with 100gr brass insert 100gr tip with ff string these tune out to 15yrds step back to 20 tuning and groups go to heck! i purchased 3 400 axis used a 125 gr tip things got better at 20yrds  i did not try the brass insertsyet these arrows are cut 29.5 the 500 are cut at 27.5 failed to say i draw 26 3/4.has this ever happened to anyone . would an arrow like the 400 with a 125tip be heavey enough to take a whitetail i think this arrow might way approx 430 gr?also are weight tubes worth the effert?  :(
Title: Re: arrow tuning borderline weak/stiff
Post by: xtrema312 on February 21, 2009, 09:14:00 PM
When you say at 20 the groups go to heck what do you mean by that?  Are you bare shafting?
Title: Re: arrow tuning borderline weak/stiff
Post by: Chuck Hoopes on February 21, 2009, 09:44:00 PM
Taken a few dozen deer w/ 525gr. arrows using 50#-60# recurves & LB's.  You'll have no prob. w/ the arrow.  As far as tuning your bow goes: have you tried raising your Brace Ht.?
Title: Re: arrow tuning borderline weak/stiff
Post by: Chub on February 21, 2009, 09:54:00 PM
xtrema312
im using the planning method. The group gets larger 2 fletched 1 bare.  I can't cut anymore off the 500's to stiffen them.

Chuck Hoopes
Yes, i did experament with the bace height. Going back to the 400 axis shafts I only have 3 (2 fletched) and (1 bare).  Still experamenting.
Title: Re: arrow tuning borderline weak/stiff
Post by: Charlie Lamb on February 21, 2009, 09:55:00 PM
I believe if you put a 100 (or even 125) grain adapters in a 125 grain tip on the 500's you'll see a big difference.

The shortness of the carbon makes it extremely stiff and it will take quite a bit of tip weight to make it fly right.

If you are not bareshaft tuning, you should probably look into it. Lots of advice here on how to.
Title: Re: arrow tuning borderline weak/stiff
Post by: xtrema312 on February 21, 2009, 11:14:00 PM
You could add the 100 inserts to the 400's and see how that goes. Then play with tip weights.  Can you find some light weight point below 100's?  That may not be a tip weight you want to use, but if it tunes you can go to 50 gr. inserts or cut down the 100 inserts a little if you want to go with the 500 arrows.
Title: Re: arrow tuning borderline weak/stiff
Post by: Chub on February 22, 2009, 05:49:00 PM
ok ill give it a go
Title: Re: arrow tuning borderline weak/stiff
Post by: fountain on February 22, 2009, 06:16:00 PM
i would try to take the heavy inserts out of the 500's and try different point weights.
Title: Re: arrow tuning borderline weak/stiff
Post by: Chub on February 22, 2009, 10:57:00 PM
ttt
Title: Re: arrow tuning borderline weak/stiff
Post by: Chub on February 24, 2009, 10:53:00 PM
ok gang i took out brass inserts and igot alot better arrow flight with standard alum insert and a 145 gr tip!
Title: Re: arrow tuning borderline weak/stiff
Post by: fountain on February 25, 2009, 06:46:00 AM
yup!!!  i did the same and had a lot better results.  not got all the weight now, but they shoot a lot flatter and straighter.  i like the feel of the lighter arrows to be honest.