Looking for help to determine the correct spine for a 62" 60@28 TD pronghorn bow. I just curious on what others are using. My arrows are cut to 29 1/4 with a 145 grain point.
Thanks for your help,
Steve
What's your actual measured draw length, and what arrows are you using?
My draw is 28" ... I use birch and cedar.
I have a 60 inch, 59# Pronghorn that I draw 29 inches. I shoot 70-75 woodies with 145 or 160 heads. Hope that helps.
Dave
Assuming the bow is cut to center and using a hard string, I would say 75+. You may do fine with 70-74, too, hard to tell for sure without shooting first. Check the spine chart at Whispering Wind Arrows, it's very good.
thanks for your help!