Trad Gang

Main Boards => PowWow => Topic started by: cedarshaft on February 05, 2009, 11:11:00 AM

Title: BEAR METRIC HUNTER ARROWS
Post by: cedarshaft on February 05, 2009, 11:11:00 AM
A FRIEND'S WIFE BOUGHT 8 BEAR METRIC HUNTER ARROWS [8.6mm] AT A FLEA MARKET. I TRIED A 11/32'S NOCK AND IT SEEMS TO FIT OKAY. A 2016 POINT WHICH I USE IS SLIGHTLY SMALLER THAN THE SHAFT. ANYONE HAVE AN IDEA WHAT SIZE POINT HE NEEDS? I AM GOING TO PUT NEW NOCKS AND FLETCHING ON FOR HIM, BUT HE CAN BUY AND SCREW IN THE TIPS HE WANTS.
Title: Re: BEAR METRIC HUNTER ARROWS
Post by: Trooper on February 05, 2009, 02:07:00 PM
I have some and they are good arrows.  I think it takes a 2117 insert. Good luck!
Title: Re: BEAR METRIC HUNTER ARROWS
Post by: Grant Young on February 05, 2009, 02:10:00 PM
Trooper is correct- 2117 fits okay- not perfect but okay and an 11/32 point works well also. All the Bear Metrics-magnums and hunters use the same size insert- the sizes result from the shaft wall thickness increasing. There was one larger than the 8.6; the 8.7.          Grant
Title: Re: BEAR METRIC HUNTER ARROWS
Post by: Grant Young on February 05, 2009, 02:11:00 PM
Forgot to say that the Bear insert was made of nylon and had no flange behind the point. They worked surprisingly well.
Title: Re: BEAR METRIC HUNTER ARROWS
Post by: cedarshaft on February 06, 2009, 11:33:00 AM
Thanks to Trooper and Grant for this info. It never fails when you try to help someone it often takes a lot more than you imagined. However, I can't think of many things better than helping an archery brother because he will appreciate it. Especially when you are weaning him away from one of those God awful contraptions with pulleys and cams and sights and overdraws and on and on. Thanks again for the info...
Title: Re: BEAR METRIC HUNTER ARROWS
Post by: joe skipp on February 06, 2009, 12:43:00 PM
The 8.6 takes a 5/16 nock and 2117 insert. They spine out to a 2413.