Trad Gang

Main Boards => PowWow => Topic started by: Friends call me Pac on December 24, 2008, 06:18:00 PM

Title: New bow rack
Post by: Friends call me Pac on December 24, 2008, 06:18:00 PM
An early Christmas present.  Made a deal with my wife Charlotte that if she bought the supplies I'd put it together and say it was a present from her.  Just finished it and put it on the wall a few minutes ago.

 (http://i214.photobucket.com/albums/cc157/pactac/bowrack.jpg)
Title: Re: New bow rack
Post by: yellow bow on December 24, 2008, 06:26:00 PM
:thumbsup:  nice job.
Title: Re: New bow rack
Post by: swp on December 24, 2008, 09:01:00 PM
Very Nice!
Title: Re: New bow rack
Post by: Bear Heart on December 24, 2008, 09:05:00 PM
Is that a kit or your own design?
Title: Re: New bow rack
Post by: Chris Surtees on December 24, 2008, 09:34:00 PM
:bigsmyl:
Title: Re: New bow rack
Post by: Friends call me Pac on December 24, 2008, 09:37:00 PM
I started out with an idea in my head and just kept building until it was finished.

I made 4 shelves on eah side for broadheads, strings or whatever.  I left a narrow tall opening in the middle to store my quivers in.  I hope it functions as intened.

I'm guessing I have about $40 or less invested in it.
Title: Re: New bow rack
Post by: singlestring on December 24, 2008, 09:49:00 PM
Looking good!
Title: Re: New bow rack
Post by: Jwilliam on December 24, 2008, 09:58:00 PM
Nice job!!!  :thumbsup:  


Bill
Title: Re: New bow rack
Post by: Toklat1 on December 24, 2008, 10:16:00 PM
very creative!  :thumbsup:
Title: Re: New bow rack
Post by: RonnieB on December 24, 2008, 11:23:00 PM
Dang, buddy, If you had let me know my wife would have bought supplies so you could have bilgt me one too!!!

Nice craftsmanship!!
Title: Re: New bow rack
Post by: Friends call me Pac on December 24, 2008, 11:47:00 PM
It wasn't hard to build.  All I used was a circlur saw, drill, sander, nails and wood glue.

It took about 5 or 6 1" x 4" pine boards and 2 1/2"  dowels and some stain.

It is 4' high by 3' wide and could be duplicated pretty easily from the photo.  

If you have access to a table saw and a drill press it would go together neater and faster than mine but since I only have the basics that is what I had to use.

Thanks for the compliments. I am pretty tickled with it.
Title: Re: New bow rack
Post by: 3-Under on December 25, 2008, 04:13:00 AM
Good thing you didn't have 20+ bows or that sucker would have been huge!!!!
Title: Re: New bow rack
Post by: Paul/KS on December 25, 2008, 09:20:00 AM
Very nice work...  :thumbsup: