Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: SouthMDShooter on November 17, 2008, 04:11:00 PM

Title: Carbon shaft advice?
Post by: SouthMDShooter on November 17, 2008, 04:11:00 PM
hey what is a quality carbon shaft for a 53# @ 28 inches longbow? Im drawing the bow just a hair over 27 inches. What would the length of the arrow need to be? Also what about the spine? Thanks for the help
Title: Re: Carbon shaft advice?
Post by: Paul Mattson on November 17, 2008, 04:28:00 PM
Gold Tip 35/55's, Arrow Dynamic Trad Lites, CX 150's,  The length will depend on your point wt. You could use Brass inserts in any of these shafts.
Title: Re: Carbon shaft advice?
Post by: zilla on November 17, 2008, 04:31:00 PM
This is pretty much the exact set up I am using.  I am shooting CE Heritage 150's, 29" long with 125 Gr up front, 3-5" Fletch out back..
Title: Re: Carbon shaft advice?
Post by: Apex Predator on November 17, 2008, 04:42:00 PM
Is your bows sight window cut to center?  It can make a big difference.
Title: Re: Carbon shaft advice?
Post by: SouthMDShooter on November 17, 2008, 06:33:00 PM
QuoteOriginally posted by Apex Predator:
Is your bows sight window cut to center?  It can make a big difference.
no
Title: Re: Carbon shaft advice?
Post by: drewsbow on November 17, 2008, 06:35:00 PM
axis or beman mfx in a .500 spine should put you close
Text only | Text with Images