Trad Gang
Main Boards => PowWow => Topic started by: Broken Arrow 1 on October 05, 2008, 10:10:00 AM
-
I just thought I would show you guys a picture of the finished barrel stove! Thanks again for all the help guys!(http:// [IMG]http://i517.photobucket.com/albums/u335/Ouradajim/wd.jpg )http://[/IMG]
-
(http://i517.photobucket.com/albums/u335/Ouradajim/wd.jpg)
-
Thanks Mike
-
Does your tent have floor in it? If so you"ll want want to put a heat sheild under the stove. You can use one of the mats they sell to put under grills that are used on a deck or a piece of tin.
-
You can also use a drip pan that they put under leaky cars. You can find them at a auto parts store. They are usually galvanized so they won't rust on you.
HTH
-
Yes my tent does have a floor in it. I thought about cutting the floor where the stove will sit?
-
Be sure you use an "Asbestus" mat, not just a piece of metal. Most hardware stores carry them. Biff