How long of a feather do you use on your carbon shafts?
I shoot 5 inch on mine.
Same
Three 5 inch or four 4 inch feathers.
I am shooting 5" feathers and am happy with them.
I cut my own.... three 5 inch shield cuts. Two from a wild turkey and the cock feather from a Canada goose.
four 3" parabolics.
Four 4" shields...
4 x 4" naners
3 of the 5.5 naners fletch on bemen hunter 500 size shat cut to 29 1/4 inch long with 125 gr points.
I use four Fletch, 4" parabolic at 90 degrees, I do shoot some five inch three Fletch but I like the 4x4's better.
You need to try different fletch types and dimensions to find out what works best for *you*.
I prefer a 4" nanner 75x105 4-fltech ...
(http://img.photobucket.com/albums/v82/rfdee/archery/jc4fletch.jpg)
I like the short bananas like Rob but just use 3 fletch with a little helical instead of 4.They work well and are quiet.
5.75" Magnums, 5" Nanners, 4 1/2" Shields, 5" Shields, 4" Nanners. Think that covers it...
QuoteOriginally posted by Stone Knife:
I use four Fletch, 4" parabolic at 90 degrees, I do shoot some five inch three Fletch but I like the 4x4's better.
What carbon shaft dou you shoot out of your Hill?
Tom,
I'm fletched with 4 -4" parabolics on my beman classic shafts.
I use four 4" parabolics, I found this combo to be the best for my set up.
3-4" right wing feathers parabolic.
Works great without a ton of slow down.
Shooting 425grn out of my 55lb long bow.