Can anyone tell me what the total uncut length of the Beman ICS Bowhunter shafts is, please? I can't find it on the Beman website.
If I'm not mistaken, the 340's are either 32" or 32 1/4". When in doubt, I'd call a local shop that stocks them and ask.
I read that they were 32" but if you ask me again in about a week I will be able to tell you. If my mailman is reading this, hurry up!
Scott
Thanks, guys.
I just got some 340's there are 32 3/4" raw shafts that is what I leave them at good arrow at a great price 41 bucks raw with nocks and inserts from FS Discount archery.
Thanks, GrnMtn.
BTW, GrnMtn, are the Bowhunter shafts made like the old "ICS Hunter" shafts with that smooth slick finish or more like the old "Hawks" with a more matte type finish?
Tom, I received my ICS Bowhunter shafts (400s). They are 32" long as measured from the nock throat to the bare end of the shaft without the insert glued into it. The shaft alone minus the insert and nock is 31.5", I hope that this helps.
The outside diameter of the 400 shaft as measured on my micrometer is .290 for those interested in footing them.
Scott F
Tom they are the smooth and slick finish they shoot great out of my zipper curve about 57 lbs and 200 up front fly like darts