Print Page - Heavy Carbon Shafts

Title: Heavy Carbon Shafts
Post by: gblrklr on August 17, 2008, 08:38:00 AM

I am currently shooting GT 35/55's with weight tubes to get an arrow that is the weight that I want to shoot. Although I have had no problems with the tubes, they are one more thing to be concerned about. Other than Grizzly Sticks, are there any other heavy carbons that might allow me to eliminate the weight tube? My arrows are full length and I am shooting the 220 grain Phantom. The 5gpi tube brings the arrow to about 625 grains.

Title: Re: Heavy Carbon Shafts
Post by: Tater on August 17, 2008, 08:43:00 AM

Give Ted Fry at Raptor Archery a call the new AD extreme FOC shafts might work for you.
They are a sponsor here click on the link for contact info.

Tater

Title: Re: Heavy Carbon Shafts
Post by: Greg Sz. on August 17, 2008, 02:02:00 PM

carbon express arrows. The 150 is 10gpi the 250 is 11gpi the 350 is 13gpi

Title: Re: Heavy Carbon Shafts
Post by: Nor'easter on August 17, 2008, 02:03:00 PM

Check out the Carbon Tech Rhino's. Tough shaft.

Title: Re: Heavy Carbon Shafts
Post by: Gordon martiniuk on August 17, 2008, 05:26:00 PM

As I have said before Carbon Express are my go to arrow with a 100gr brass insert and a Broadhead weighing in the 200 to 225gr range make for a very good set up try and tune them at least 30 " long and you will have a very heavy set up with extreme F.O.C :bigsmyl: :thumbsup: :archer:

Title: Re: Heavy Carbon Shafts
Post by: Biggie Hoffman on August 17, 2008, 05:59:00 PM

I'm shooting carbon express 350's and also shoot the Muzzy phantom 220...my arrows weight 700 gr without the weight tubes and alum inserts

Title: Re: Heavy Carbon Shafts
Post by: gblrklr on August 17, 2008, 06:26:00 PM

Thanks for all of the advice. I guess I should have said that my bow is 51# @ 28" and I am drawing right at 28, maybe a little more.

Trad Gang

Main Boards => PowWow => Topic started by: gblrklr on August 17, 2008, 08:38:00 AM