Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: beachbowhunter on July 18, 2008, 05:34:00 PM

Title: which inserts for STOS?
Post by: beachbowhunter on July 18, 2008, 05:34:00 PM
I'm trying to get my point weight up and it looks like I need to go to a glue on. Which inserts work well with STOS 160s? The long 30 grain aluminum or the shorties?

Thanks,
Norb
Title: Re: which inserts for STOS?
Post by: elk ninja on July 18, 2008, 05:53:00 PM
The steel inserts if you want a high point weight-FOC.  I have the 100's, but I might have to get the 125's for my carbons.
Mike
Title: Re: which inserts for STOS?
Post by: SlowBowinMO on July 18, 2008, 05:57:00 PM
The 30 grain aluminum longs are 5/16", you want an 11/32" for the STOS.

A 25 short or 42 long along with the steel 75, 100 and 125 will all fit nicely, just tweak to reach your desired total point weight.
Title: Re: which inserts for STOS?
Post by: beachbowhunter on July 18, 2008, 07:07:00 PM
I'm using 100 grain brass screw-in inserts so I need the screw-in adapters to match. Looks like the 25 or 42 would be the ticket.

Thanks guys.
Title: Re: which inserts for STOS?
Post by: Fletcher on July 18, 2008, 08:25:00 PM
I would recommend with the long adapters for good point alignment and strength.
Title: Re: which inserts for STOS?
Post by: Cherokee Scout on July 18, 2008, 09:27:00 PM
I use both. No problems with either.
Text only | Text with Images