Trad Gang

Main Boards => PowWow => Topic started by: MikeP in WV on July 07, 2008, 10:02:00 AM

Title: Bow just a bit heavy
Post by: MikeP in WV on July 07, 2008, 10:02:00 AM
I have a 70# recurve that I like a lot but that last inch or so before anchoring is getting more difficult. Is there any way to reduce a bow's draw weight by a few pounds to make it more tolerable. Would a higher or lower brace height help or a different type of string? Just curious...
Title: Re: Bow just a bit heavy
Post by: aromakr on July 07, 2008, 10:28:00 AM
Mike:
The bowyer that built the bow can  probably reduce the weight a few # ask him.
Bob
Title: Re: Bow just a bit heavy
Post by: bosteldr on July 07, 2008, 10:43:00 AM
Put a longer string on the bow or reduce brace heigth.  The bow may make more noise but this will give you an inch or so to work with.
Title: Re: Bow just a bit heavy
Post by: BobW on July 07, 2008, 10:43:00 AM
Droptine69 is a sponsor here and does bow weight reduction services.  Might want to talk with him if things don't work out with the bowyer (though the guy who built is is the best first contact)

www.droptinetraditions.com (http://www.droptinetraditions.com)
Title: Re: Bow just a bit heavy
Post by: Jedimaster on July 07, 2008, 05:00:00 PM
Jim Belcher at Belcher Bows.  Check out the Bow Hospital.
Title: Re: Bow just a bit heavy
Post by: Rob DiStefano on July 07, 2008, 09:58:00 PM
Another one of our sponsors, Ted Fry @ Raptor Archery, just reduced the weight on one of my TD longbows - he did a great job, including the refinish.