Trad Gang

Main Boards => PowWow => Topic started by: Coach Jones on February 01, 2026, 08:57:16 PM

Title: 1816 or 1916
Post by: Coach Jones on February 01, 2026, 08:57:16 PM
Currently shooting 700 Dark Timbers cut 30 inches with 250 up front from my 38@28 Kanati longbow.  I draw 27.5 inches and shooting a B55 string.  I really wanted to pick up some 1916 Autumn Orange shafts to fletch up.  Do you think if I leave the 1916's at 30 inches that they will shoot out of my bow or do I need an 1816 shaft?  Really wanted orange. 
Title: Re: 1816 or 1916
Post by: Orion on February 01, 2026, 09:12:23 PM
With that much weight up front and left long, 1916s should work. You may need to do a little tinkering to get the best length.  Doubt they'll seem stiff, but if they are, a low stretch string would solve the problem. 
Title: Re: 1816 or 1916
Post by: Kelly on February 01, 2026, 09:31:24 PM
1816 is 44# spine at 28"

1916 is 52/53# spine at 28"
Title: Re: 1816 or 1916
Post by: jamesh76 on February 02, 2026, 07:00:54 AM
I sent ya a message, if your close I'm pretty sure i have each spine you could try out before buying some.
Title: Re: 1816 or 1916
Post by: Kirkll on February 03, 2026, 09:23:05 PM
Quote from: Coach Jones on February 01, 2026, 08:57:16 PMCurrently shooting 700 Dark Timbers cut 30 inches with 250 up front from my 38@28 Kanati longbow.  I draw 27.5 inches and shooting a B55 string.  I really wanted to pick up some 1916 Autumn Orange shafts to fletch up.  Do you think if I leave the 1916's at 30 inches that they will shoot out of my bow or do I need an 1816 shaft?  Really wanted orange.
Why the B55 string? That bow should be FF compatible, and using FF string will make a significant difference in arrow spine.  :dunno:  :dunno:
Title: Re: 1816 or 1916
Post by: Coach Jones on February 04, 2026, 09:51:09 AM
Quote from: Kirkll on February 03, 2026, 09:23:05 PM
Quote from: Coach Jones on February 01, 2026, 08:57:16 PMCurrently shooting 700 Dark Timbers cut 30 inches with 250 up front from my 38@28 Kanati longbow.  I draw 27.5 inches and shooting a B55 string.  I really wanted to pick up some 1916 Autumn Orange shafts to fletch up.  Do you think if I leave the 1916's at 30 inches that they will shoot out of my bow or do I need an 1816 shaft?  Really wanted orange.
Why the B55 string? That bow should be FF compatible, and using FF string will make a significant difference in arrow spine.  :dunno:  :dunno:

Because it shoots so much more quiet with a B55 from TTT than it does with my SBD string.  I also have a Ten Ring string for it.   It's a hunting bow, so the most important thing is to have it shooting as quiet as possible.  3-4 fps gains me nothing.  However, I have thought about having Trevor make me a D97 to try but on all my bows, B55 is almost always the most quiet string.