Aside from reduced broad head blade size with 100gn, I'm wondering if there is a significant effect to arrow flight with more weight out front of the arrow vs more inside the shaft?
Was just playing around with some arrows and only had 100gn inserts on hand which got me to think'in how that might impact shaft spine
Not enough difference for most to recognize. I do both and can't detect a difference.
This is interesting. I've done a lot of research on this exact topic lately. I shoot 5mm shafts and have probably been nerding out on trying to build a more forgiving setup. I've had bows that just tuned easier than others, and I've tried to figure out why.
I've noticed that Olympic and barebow shooters try to keep the arrow node behind the rest. There was a good explanation by a barebow shooter on how that creates a more consistent paradox of the shaft as it leaves the bow, and a more forgiving paradox to a bad release. Looking back at the arrow setups, I've noticed the easiest tuning and most forgiving set ups all had a longer insert and the arrow shaft was cut almost to the riser to get good bare shaft flight. Which I hypothesized was moving the arrow node back behind the pivot point on the strike plate. I checked my current arrow setups ups, which I've had some issues with, and all the nodes were in front of the pivot point.
I guess my theory is, it might not make a lot of difference in how much the shaft flexes or the dynamic spine, but it could make a difference in how consistent the shaft flexes around the riser and leaves the bow. I'm going to try some longer inserts and lighter tips to move the node, just to see if it makes a difference.
Idk... I'm bored, currently injured, and need something to tinker with.
Love it when I learn something new! Arrow node is something I never heard of before Arctic Hunter. Thanks for that!
The further the center mass of the weights are extended; the more they have an effect on reducing the dynamic spine of the shaft...so weights in the shaft will not weaken the shaft as much as the same weight would in front of the arrow (like in a broadhead).
But as others have said, if your bare shaft is tuned well; its not usually going to make a difference that you can see when the feathers are placed on the shaft