Anyone ever see extra long wraps, like 14" or so?
I ask because I have shafts that have painted logos, and spine with 250 points. Clean off the paint off and they spine with 235. I like the 250's and the paint is not terrible, but doesn't line up with my spine/nock tune. Just trying to keep the same weight/spine.
No I haven't but buying the wrap material (Oracal 651 or 751) buy the roll you could cut pieces 14" long. Then cut to width.
Thanks much, Mr M60.
I use 1" reflective tape that i get from Amazon and make it as long as needed
Quote from: Mint on December 09, 2025, 05:32:46 PMI use 1" reflective tape that i get from Amazon and make it as long as needed
That's worth a shot, easier that cutting to width. Any problem with edges or corners rolling up? Lay pretty flat at the overlap?
Onestringer has wraps up to 10". Might be worth trying them?
Quote from: BAbassangler on December 09, 2025, 07:09:35 PMQuote from: Mint on December 09, 2025, 05:32:46 PMI use 1" reflective tape that i get from Amazon and make it as long as needed
That's worth a shot, easier that cutting to width. Any problem with edges or corners rolling up? Lay pretty flat at the overlap?
I clean the shaft with acetone or denatured alcohol and haven't had one problem and they hold like iron. If you don't clean the shafts then i was having problems.
Quote from: Mint on December 09, 2025, 05:32:46 PMI use 1" reflective tape that i get from Amazon and make it as long as needed
Do you have a brand name or any more info you can share? The reflective tape I see on Amazon all looks like it may be textured (could just be the way it appears in the pictures). I'm guessing you have no issues with fletching sticking and staying in place?
I have some 9 inch reflectives from Onestringer on a few dozen arrows.