I just finished up a set of Bare aftermarket hybrid limbs for a TD Bear A riser ,and I built a complete "Bare Foot" A+ riser with the RC limbs for the same customer. I thought i'd share the photos with you guys.
[attachment=1]
[attachment=2]
[attachment=3]
[attachment=4]
[attachment=5]
here are some finished photos of the "Bare Foot" RC.
https://photos.app.goo.gl/4siPQesAMtcChwTX6
Will it work in a Bear riser? if so, KQQL ...
Will the riser take a bear TD limb?
Quote from: PAPALAPIN on May 11, 2025, 04:59:44 PM
Will it work in a Bear riser? if so, KQQL ...
Will the riser take a bear TD limb?
Yes the Bare Foot riser will take Bear limbs, and I build aftermarket limbs for Bear risers..... But.... The limbs I build, both the hybrid long bow, and static tip Recurve limbs are a bit more aggressive than Bears stock limbs. I require the customer send their riser to me to insure proper limb alignment. I've found the Bear risers much too inconsistent to just build limbs and send them out with a warranty.
The Bare Foot riser is a bit wider in the limb pocket section and I match the limbs width to the riser. These limbs will not fit a Bear riser or be interchanged.
Kirk
That's a cool build, I bet those limbs are substantially higher performance with the static tip.