can anyone offer some experience with what shaft I need? recurve drawing 54@31". I draw 31" and need to leave the arrows at 32"+. Using 145 gr tips. Thanks for any help you can give.
For what it's worth: I pull mid-50's at 32" and use 340's with 125-grain heads.
Thanks Jason, did you try the 400s by chance?...were they way too soft?
I like the 400's up to about 55lbs with 140 gr up front. Above that I like the 340's with 220gr up front @ my 29.75" draw.
Kelly,
For me, the 400's were definately too weak. The only way I could get them bare shafting straight was with a 65-grain tip.
Kelly,
FWIW, I shoot 56 lbs @ 28 inches and, like Jason, I shoot 340's....w/ 250 gr up front AND a 100 gr brass insert. Hope this helps.
homebru
Kelly, I shoot 340 MFX at 31" out of a 67# longbow with 175gr. points and they are perfect- also 340 FMJ set up the same , all with 4-4" feathers.