Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: Kirkll on August 06, 2023, 11:25:19 AM
-
I’m starting to run low on threaded inserts for my limb bolts, and location pins too.
I used to buy them from Dale Stahl by the 100 count, but then he passed away. Since then I’ve bought them in small batches from Binghams projects… Now that they are shutting down, where do you guys purchase your TD hardware?
Kirk
-
I just got 200 pins and 100. Bolts off hebay cheap and get my bezels and plastic washers from Lancaster. I have made the washers with a hole saw but ki da pain.
-
I just bought some inserts from McMaster-Carr. I get my bolts and alignment pins from the auction site. Do a search for aluminum countersunk washers for your bezels. Lots of different colors.
-
I’m starting to run low on threaded inserts for my limb bolts, and location pins too.
I used to buy them from Dale Stahl by the 100 count, but then he passed away. Since then I’ve bought them in small batches from Binghams projects… Now that they are shutting down, where do you guys purchase your TD hardware?
Kirk
Ask binghams where they get the threaded inserts
-
Big Jim has them
-
While I have no idea of their cost in comparison to others, I've dealt with Rosewood archery quite a bit lately and I've really come to love them. I've been buying brass hardware from them.
-
Good thread Kirk... I've been wondering about this too. Zipper Bows has kits at a good price. The pins and bolts are easy to find at affordable prices online. What is the part# for the inserts from mcmaster?
-
Part #90248A028
-
I just bought some inserts from McMaster-Carr. I get my bolts and alignment pins from the auction site. Do a search for aluminum countersunk washers for your bezels. Lots of different colors.
I just looked at those fro McMaster Carr and I believe those are shorter in length than what I’ve always used. What are the length?
-
Here ya are.
-
I’m starting to run low on threaded inserts for my limb bolts, and location pins too.
I used to buy them from Dale Stahl by the 100 count, but then he passed away. Since then I’ve bought them in small batches from Binghams projects… Now that they are shutting down, where do you guys purchase your TD hardware?
Kirk
You hit a home run with this topic!
Inserts look good to me.
washers too https://www.probolt-usa.com/aluminum-countersunk-washer-m8-25mm-od/
-
They are a bit longer than the ones Elmont sold.
-
They are a bit longer than the ones Elmont sold.
I think the ones Binghams sold were an inch long. So these are pretty close…. Thanks. Kirk
-
I know a guy who has some of the double thread inserts but no bezels from Dale Stahl's estate sale, think he has about 300 he can sell. I'm not putting his phone number here but if you message me I can hook you up with him, don't want folks calling him for years when he sells them off... No idea on price,sorry.
-
Kirk I would think you could make them out of all thread on your mill if things really got bad :goldtooth:
-
https://www.zipperbows.com/lbk
https://www.3riversarchery.com/takedown-bow-assembly-set.html
Here's two links for the kits on Zipper bows and 3rivers websites.
-
Kirk I would think you could make them out of all thread on your mill if things really got bad :goldtooth:
Naw man…. Ya need a metal lathe to do that accurately. I actually did have a piece of galvanized pipe milled and threaded a few days ago by my neighbor for a special boat motor part I needed. Watching the threading process was pretty fascinating.
Kirk
-
https://www.zipperbows.com/lbk
https://www.3riversarchery.com/takedown-bow-assembly-set.html
Here's two links for the kits on Zipper bows and 3rivers websites.
Wow! I didn’t know zipper was using 1/4-20 bolts and pot metal furniture inserts…With dense hardwood or even softer woods I would stay away from those self tapping inserts that cut their own threads. Most everyone uses 5/16-18 bolts and 1/2-13 OD x 1” long threaded inserts that require a tap.
You can find a lot of them that are that size, but only 1/2” long which would work fine for metal or even tapping into G-10… but wood? Not this kid…too much pressure on those bolts.
-
I just got 200 pins and 100. Bolts off hebay cheap and get my bezels and plastic washers from Lancaster. I have made the washers with a hole saw but ki da pain.
Hey Mike, when you look on eBay for pins and bolts, is there a specific search word that you use ? as I can’t seem to find them. B
-
Search 1/4x 1/2 dowel pins alloy steel. 5/16-18 UNC Allen drive 1 5/8"
-
Search 1/4x 1/2 dowel pins alloy steel. 5/16-18 UNC Allen drive 1 5/8"
Thankyou 🏹
-
I just got 200 pins and 100. Bolts off hebay cheap and get my bezels and plastic washers from Lancaster. I have made the washers with a hole saw but ki da pain.
Hey Mike, when you look on eBay for pins and bolts, is there a specific search word that you use ? as I can’t seem to find them. B
MSC Industrial supply--I bought many things with this company Back when I did machine work and tool and die work.
Dowel pins
https://www.mscdirect.com/browse/tn/Fasteners/Pins-Clips-Retaining-Rings/Pins-Clips/Dowel-Spring-Taper-Pilot-Pins/Dowel-Pins?navid=2108886&refinements=Brand%3AMade+in+USA--Pin+Type%3APrecision--Material%3AAlloy+Steel--Diameter+%28Inch%2C+Fraction%29%3A1%2F4
Bolts
https://www.mscdirect.com/browse/tn?searchterm=Flat+head+bolts&refinements=Material%3AAlloy%20Steel--Brand%3AMade%20in%20USA--Head%20Type%3A82%20degree%20Flat--Thread%20Size%20(Inch)%3A5%2F16-18
-
If you need the threaded inserts, I have a few extra, overbought for the TD kits...
-
I am thinking about trying these sex bolts as limb locking hardware. Have anyone done so?
https://www.mcmaster.com/products/sex-bolts/thread-size~5-16-18/
-
If you need the threaded inserts, I have a few extra, overbought for the TD kits...
Iam interested Kenny ! Are they stainless Kenny? I’m in no rush. Just got home from back surgery late yesterday. I’m told I can’t do hardly anything for sometime so that will keep me out of the shop, but it’s a good time to stock up! :biglaugh:
-
Kenny put me on your insert list . If you have enough .
-
I am thinking about trying these sex bolts as limb locking hardware. Have anyone done so?
https://www.mcmaster.com/products/sex-bolts/thread-size~5-16-18/
Bue go back to page 1 part # 90248A028 McMaster Carr :thumbsup:
I guess that thread locking stuff could be removed
-
We have 7/8" brass bezels and 1" brass bezels also pins washers and stainless threaded riser inserts.
We also cary black and brass bolts. I will sell these separately or in our assembled kits.
We are also a direct dealer for Gordons glass.. just added 2" in clear and black and will be adding more sizes and colors as money allows.
We have bamboo in planks and pre sanded laminates. Lots of wood too.
Thanks, BigJim