Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: Mad Max on January 22, 2022, 04:17:05 PM
-
Going to North Carolina to James Parkers all next week :jumper:
As the topic said, We are going to make a BBB for me and some other bows , what ever James wants to build I will help.
Oh yeah Beer TOO
Leaving out early Monday morning, about 9 hour drive, I will post some Pictures when I get back
-
Tell Becca, James and the wild bunch hey for me. It ought to be a fun and informational trip. Safe travels.
-
Be sure to take cold weather gear.
-
Thanks Pat
Long--I've been watching the weather there and it's been just like I have here at my house, and he has a heated shop.
-
Mark, where are they living now, Lincolnton?
-
In the title of this thread there is only beer, not beers...
What's up with that?? Two guys and one beer ain't good , best I remember... :laughing:
-
Have fun buddy!! :thumbsup: :thumbsup:
-
In the title of this thread there is only beer, not beers...
What's up with that?? Two guys and one beer ain't good , best I remember... :laughing:
I believe that's called Brokeback Mountain... :laughing:
Sounds like a good time... Have fun...
-
Mount Holly
Got it Roy
Flat land shredd, no mountains :tongue:
-
James is a great guy...he was at the flint ridge knapin and took time to sit me down in his tent and show me how to chip out a point. Then sent me home with a bucket of flakes.
-
That sounds like James. He is very generous sharing all the info in his head and from his experiences...which is a lot. I've known James for many years and he's always been like that. :thumbsup:
-
x3
-
Sounds like a fun trip max. Enjoy!
-
I made it back home 11:30 last night.
I know James was building Humming Bird bow's , but I did not know
Linda Graham gave him the Inventory and the business.
Un finished bows in all stages, lams, riser blocks, glass, forms, ect.
We made 2 of James bows while I was there but the rest of the time he was prepping Humming bird bows for finish, lot's of grain filling and fine sanding, some really nice figured wood.
I will post pictures later today.
I had a great time all week, Rebecca and the kids made sure I was fed and made me feel right at Home
-
Looking forward to seeing all of James' goodies at the Classic. I had no doubt that Becca would take good care of you while you were there, Mark. What's one more mouth in with that group of heathens. Is the little girl still a terror. James always said she was the meanest of the bunch. :readit: :laughing:
Glad you made it there and back safely.
-
Looking forward to seeing all of James' goodies at the Classic. I had no doubt that Becca would take good care of you while you were there, Mark. What's one more mouth in with that group of heathens. Is the little girl still a terror. James always said she was the meanest of the bunch. :readit: :laughing:
Glad you made it there and back safely.
Breana is sweet to me, she made me a Bracelet and a Ring and her Birthday was the day I got there 9 years old
(https://i.imgur.com/oaR1NUP.jpg)
-
I need to add to Bows Beers and Buddy's and Moon pies
(https://i.imgur.com/mZBN3Ib.jpg)
I brought 2 Boo slats and some Blonde Ipe, and some black Diamond wood for the BBB (Bamboo back and belly) Bow
I can't tell any secrets on making these BBB
We heat treated the belly boo first and put tape on both the boo slats and ground the taper's and started the process.
(https://i.imgur.com/sRBdWBT.jpg)
We got the riser ready for glue up
We used smooth on for the glue up
(https://i.imgur.com/SXoKMPs.jpg)
(https://i.imgur.com/dlt8kFO.jpg)
We laid out the limb width taper and sanded the sides
(https://i.imgur.com/5PMjYgr.jpg)
(https://i.imgur.com/lbQoV4n.jpg)
Glued on some limb tips and strung it up
It's amazing how close to tiller it was on first brace
Just a few scrapes and it was ready to shoot
(https://i.imgur.com/xIc5DHr.jpg)
Not a very good straight on picture of full draw
(https://i.imgur.com/1o3sZ4q.jpg)
(https://i.imgur.com/ajMUQzP.jpg)
(https://i.imgur.com/3rwg8pj.jpg)
It came out to 55#@28" and after shooting and exercising the limbs 50#, just a bit heavy than we wanted
-
Dye job on the Back
(https://i.imgur.com/95f8WzC.jpg)
(https://i.imgur.com/t7nO6lG.jpg)
(https://i.imgur.com/LJdtjpM.jpg)
-
Some Humming Bird stuff
The top and bottom shelf is all Humming Bird Inventory
(https://i.imgur.com/8vErDql.jpg)
Forms
(https://i.imgur.com/sLqp8W9.jpg)
(https://i.imgur.com/Tyy3Gvu.jpg)
Cocobolo
(https://i.imgur.com/JoWp0VD.jpg)
(https://i.imgur.com/3VZa4HQ.jpg)
(https://i.imgur.com/KJSDDgD.jpg)
-
When I got there James had a glass bow off 1 of his Horn bow forms
It was real squirrely for the first one off the form, he knows what tapers to put in it now.
The string would pop off before we could get it braced
(https://i.imgur.com/qcAYxdB.jpg)
(https://i.imgur.com/X7Jt83v.jpg)
-
Holy moly that thing is scarey lookin. :scared:
-
Nice, cept for that one fellow:)
-
Nice looking shop James has there. Roy, doesn't look like either one of them missed any meals...or desserts. :biglaugh:
-
:tongue:
-
Ya got that right, Pat:)
-
I thought they looked in shape.
Shaped like me anyway... :biglaugh:
-
Some of his machines
(https://i.imgur.com/16Ie3XZ.jpg)
(https://i.imgur.com/vvn7w2a.jpg)
(https://i.imgur.com/5DlGixp.jpg)
This down draft table was made for grinding steel, It will suck the chrome off a door knob
(https://i.imgur.com/WK8QrhU.jpg)
4 band saws
(https://i.imgur.com/NKfJuXA.jpg)
(https://i.imgur.com/qcAYxdB.jpg)
-
James has moved uptown. The last shot of his I saw was near Hickory and was a shed next to the barn.