Since my Widow will not be here for another 12 weeks or so this gives me some time to figure out what arrows I want. I Will be shooting 58@28. I do not have any experience with wood at all, so whatever advice you can give that would be great.Some of the questions I had were..Do they need reg maintence(straightning),.What spine do I need?,How do I even start to bareshaft tune?,Who is a good repitable arrow builder?
Thanks in advance
All I've ever shot is wood. I have never had to maintneance any that I have bought within the last 10 years.
There is a lot of information on bare shaft tuning in the library on this site.
Badgerarrow has made a few for me and he can help you with your needs. Best to describe: bow weight, draw length, type of string. Given that you are shooting a popular model there may be others here who will know a lot more about your setup than me.
Paul Jallon of Elite Arrows ... one of the best arrow builders, very reasonable prices. He is a good man to talk to relative to spine and tuning. However, I would not get too excoited about arrows until you get the bow, or are just about to. The bow will tel you what it wants relative to spine.
Good luck.
Bob B.
I think the wider web-site has a formula for figuring out what spine arrows need to be shot out of wider's.
Jack
frasetter:
Without knowing your draw length and desired arrow length, I can't give you an exact spine range. However I can tell you it will be high spine. Example if you draw 28" and desire 29" arrows BOP 80/84 will be your starting point, you can go over that and still get excellent performance. I acually jumped that one spine because at 58# your at the upper end of your minimum spine.
Thats the nice thing about bows cut 3/16" past center, you have a wide range of useable spines. I have made literally thousands of arrows for widows and this formula works very well.
Bob