Trad Gang

Main Boards => PowWow => Topic started by: kennym on February 13, 2007, 07:29:00 PM

Title: MOAB brace height?
Post by: kennym on February 13, 2007, 07:29:00 PM

Just received a preowned Thunderstick MOAB today,anybody know what Jim recommends for brace height? Want to shoot it tomorrow or I'd email Jim..........

Thanks,Kenny

Title: Re: MOAB brace height?
Post by: Blackhawk on February 13, 2007, 07:45:00 PM

My 64" MOAB (54# @ 28") shoots best for me (quiet, forgiving, accurate,) at 7.75".  Some may argue that is too high, but it's best for me.

Most probably brace between 7.25" and 7.50."

These are great bows at an even better value.

Title: Re: MOAB brace height?
Post by: Terry Green on February 13, 2007, 07:49:00 PM

I have my 60 inchers braced at 6.5.......that's the sweet spot for mine.

Title: Re: MOAB brace height?
Post by: kennym on February 13, 2007, 08:06:00 PM

Thanks guys. Terry,this is a 60" and slippin the string up the limb to brace it ,thats what it was too,just didn't wanna start too low.Thanks again.

Title: Re: MOAB brace height?
Post by: southpawshooter on February 14, 2007, 10:31:00 AM

I shoot mine at 6.5" as well......

Title: Re: MOAB brace height?
Post by: 2ndxarnd on February 14, 2007, 11:32:00 AM

Mine is at 6.75" but don't hesitate to change it around if you begin hearing any noise. My string slaps when it down below 6.5. They're great bows...

Title: Re: MOAB brace height?
Post by: JOKER on February 14, 2007, 12:22:00 PM

My 62" MOAB likes 6.75".

Title: Re: MOAB brace height?
Post by: BobCo 1965 on February 14, 2007, 12:33:00 PM

Yes 6.5 on a 60".

Title: Re: MOAB brace height?
Post by: kennym on February 14, 2007, 09:13:00 PM

Thanks for the replies guys,shot her today and agree,great bow!!!