If you shoot a bow between 40-50 lbs, you need to look at the Sponsor's Classifieds by Sipsey River. Our best price ever on Carbon shafts.
I went, I looked what is it I missed?? :rolleyes:
Never mind I did not read the fine print, OK OK I did'nt have my glasses on :thumbsup:
If you have questions, let me know.
John
Great price!! I used to shoot them out of my 42# PSA and with 175 grains up front they smoked!! If ya shoot between 40-50 #s and experiment with length and point weight these are a great arrow.
I need some shafts for a 35lb recurve, but don't know squat about them. What shafts are you talking about?
Blackhawk Vapor 2000s
If you want to see the specifications and a picture of these shafts, go to Sponsor's Classifieds.
Look for ad titled "Vapor 2000 closout" by Sipsey River. All information is listed there.
hey john take some to the astb shoot
.my son needs some 1 dozen
I havent played with carbons much. Could I get these to fly out of my wifes bow? 28#@24" Shrew with 450+ string shooting a 26" arrow? She draws 24".
They would be awful stiff for her cut at that length Tim. If you left them full length and used 100 grain inserts/heavy points and tuned from there they might work ok.
Thanks Dave I kinda figured that. She is shooting her aluminums pretty good right now. I think I will stick with them.
Thanks for the heads up John.Is this the last of these shafts you can get?
Shawn/VM13
I'm very naive wrt carbons! How about with a selfbow, 60@27, 29,5" arrow? Yes, my ash and poplar dowels work just fine but ... I'm always looking to broaden my horizons.
Mark
Mark. I am not sure about the self bow, but 60# is probably way too stiff for these shafts. The spine is about .500-.550.
Thanks for the feedback, John.
Mark