I know you are not supposed to look at the way the arrow is in the target while bareshafting but where the arrow hits. However , I notice when I shoot bareshafs that when I see them kick nock right(I'm RH) in flight they hit left and the nock is out to the right. Same for a weak shaft. If I play around with point weight and length it seems I can usually get my shafts to fly to the target and they look really striaght in flight with no kicking if I have a good release.
My bareshafting: Shoot a given shaft and tip. Watch for any kicking in flight and see where it hits. Like I said earlier, usually if I see it kick right it hits left and if it kicks left it hits right. From here I add weight or cut the shaft until I "SEE" the arrow flies striaght and hits the POI. Help me out here guys! AM i wrong and should I be concerned with nock orientation.
This is a similar method that I use. This is how I get arrow spine and nock height correct and I wont change anything as long as Im using field points. I do however tune my broadheads the way they show you on the OL Adcock site.
i pretty much do the same and it works. My arrows hit where I want them to.
Just remember wraps and fletchings stiffen em up some...I always leave mine a tad weak slight knock left/high is where i keep mine.