Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: monterey on February 20, 2020, 06:58:55 PM

Title: Working on recurve riser template
Post by: monterey on February 20, 2020, 06:58:55 PM

I'm going over from the long bow side to the dar..... I mean recurve side.

Finally settled on the form template and waiting for warmer weather and for my SIL to return his table saw that he unborrowed after eight years.  Some people have a lotta noive!

Also did a CAD for the riser block.  Need some warm weather out here!

 [ You are not allowed to view attachments ]

Title: Re: Working on recurve riser template
Post by: Flem on February 20, 2020, 07:23:33 PM

Good luck and don't worry, the keepers of the faith with take you back when you repent :saywhat:

Title: Re: Working on recurve riser template
Post by: Crooked Stic on February 20, 2020, 10:19:59 PM

That is a good riser length. And put some stable core in the limbs.

Title: Re: Working on recurve riser template
Post by: monterey on February 21, 2020, 01:20:42 AM

Definitely some SK.  Got some stressin and guessin to do on the stack.