Trad Gang
Main Boards => PowWow => Topic started by: Bully on November 17, 2019, 08:10:57 AM
-
So, I currently have a longbow. I like it a lot. However it is a one piece and I think I want a 3 piece/takedown as I will start to travel a little bit with it and that will make it SOOOOO much easier. I like to shoot off the shelf and I really enjoy smooth draws and quiet shots.
If I go ILF, I'm thinking something in the 15" to 17" range is where I'd like to stay. I'm a fan of shorter bows (I hunt, no real target shooting) and don't want to exceed a 60" bow (5'8 w/ 28.5" dl). I really like my current 58" bow but will go up a bit if necessary. Additionally, I'm not a wealthy guy. I make room for my hobbies and obsessions but don't have tons of money to throw around. I'd love to find a nice little shooter for a few hundred dollars if at all possible. I'm also happy to buy separately, over time if necessary, to get the most "right" thing for me that I can.
Any recommendations based on the above information?
Thanks a bunch for any help.
-
My suggestion would be to look at Sarrels Archery, or Primal Tech bows. I own both, and both are super sweet!!!!
Bisch
Sent from my iPhone using Tapatalk Pro
-
My suggestion would be to look at Sarrels Archery, or Primal Tech bows. I own both, and both are super sweet!!!!
Bisch
Sent from my iPhone using Tapatalk Pro
Do either have a website? I don’t have FB.
-
I would highly recommend a Primal Tech longbow, Randy makes a 2 & 3 and even a 4 piece takedown. He goes by Crittergetter on this site, I'm sure you could send him a PM and start up a conversation. I have one of his 3 piece takedowns and wouldn't own anything else!!
Rodney
-
Check the classifieds on this site. You can buy a very high quality bow that fits your needs for an excellent price. Of course it helps to know what you are looking for. If possible attend some shoots where you can meet up with other traditional archers or vendors who will let you shoot their bows. I have had great success buying used and saved tons of money. Good luck and shoot straight.
-
Sarrels and Primal Tech are both on fb. I don’t do fb either, but if you call them, I bet they could tell you the info about their bows, and send you pics too.
Bisch
-
Many, many great bows out there, Classifieds would be a good start. I don't have any TD, other than used recurves I recently traded for.
-
There are lots of great bows out there that ought to work for you. You could probably find a used one for a pretty decent price. I've never used the classifieds on here, but I'm sure there will be something on here that could work for you. Could also try the classifieds on Archery(Talk) or Leather(wall). Plus, if you don't like what you get, you aren't out the full price of the bow and you can try and sell or trade for a different one until you find one that works for you.
-
I'm a guy on a budget also. I get that. Look at RMS gear. You could save a lot of money there. They have new and used bows. They have all types and I have been to their store in Colorado. To say its amazing is an understatement.
-
Anyone in their right mind will be in shock at what I'm about to say, but if you really like the bow you have, cut it into two halves and install a brass sleeve: My main bow is a two-piece take down like this and I love it! Once it's together, you cannot tell it isn't a one-piece. It's amazing! And I will shoot the nock off the arrow of anyone who tells me my bow isn't as accurate as a one-piece. I love two piece takedowns!
I am not a fan of 3 piece takedowns though.
Just my opinion, but a bow should not have screws. Too mechanical for me. :dunno: There definitely is a lot of merit, however, to the idea of being able to progressively increase your bow's poundage to accommodate your strength gains and development as an archer. That's where a three-piece shines. But still, I cannot stomach a bow with screws. :dunno:
-
By the way, don't actually cut the bow in half yourself, unless you are more handy than the average guy. Pay someone to do it for you.
-
Anyone in their right mind will be in shock at what I'm about to say, but if you really like the bow you have, cut it into two halves and install a brass sleeve: My main bow is a two-piece take down like this and I love it! Once it's together, you cannot tell it isn't a one-piece. It's amazing! And I will shoot the nock off the arrow of anyone who tells me my bow isn't as accurate as a one-piece. I love two piece takedowns!
I am not a fan of 3 piece takedowns though.
Just my opinion, but a bow should not have screws. Too mechanical for me. :dunno: There definitely is a lot of merit, however, to the idea of being able to progressively increase your bow's poundage to accommodate your strength gains and development as an archer. That's where a three-piece shines. But still, I cannot stomach a bow with screws. :dunno:
I would add that I used to shoot a 1 piece and then went a 3 peice binge. Never liked ilf personally years later I am back to 1 piece bows in shorter lengths. I just love 1 piece bows although I've never shot a 2 piece. I am shooting a 52 inch hybrid and it shoots as well if not better than my 3 piece bows in longer lengths and is a lot lighter. Bear paw also makes a stellar bow 3 piece for under 500 bucks with a life time warranty.
-
Don't think I could have my Big River 50's style recurve cut. It can't be replaced.
-
I prefer one piece but I've got a three piece bow and have no problem with it at all. It shoots great, it's easy to take apart and put together (no tools required), and it's extremely convenient for storing at while at school!
-
Bully, over the years I have owned many, many customs--one piece, 2 piece, and three piece. Last winter I decided to give Jim Casto's target panic program a try and needed to get a lighter draw weight to begin. Being semi-retired and not wanting to spend a wad on another bow, I ordered a Galaxy Ember three piece longbow from Lancaster Archery. Was I ever surprised! That little 60" bow has the best feeling grip of any bow I have owned and shoots just great. And it cost just a few cents under $200. I now have two risers and three sets of limbs. It's the bow I now shoot most often. The great thing about it is that if you don't often need a TD, you don't have a lot of money tied up in it. That's the same bow as the Black Hunter sold by Twigg Archery and comes with either longbow or recurve limbs which are interchangeable. Either dealer will treat you right and stand behind the bow. Just something to consider. :thumbsup:
-
If your not in a hurry and like you said you want to get it right also at the right price, i would recommend you attend ETAR July 2020 and you can shoot all the bows you like and talk with many bowyers about their craft. Best of Luck in your quest.
-
We have our annual sale going right now take a look at our webpage. we may have what you are looking for.
dryadbows.com
mike
-
Anyone in their right mind will be in shock at what I'm about to say, but if you really like the bow you have, cut it into two halves and install a brass sleeve: My main bow is a two-piece take down like this and I love it! Once it's together, you cannot tell it isn't a one-piece. It's amazing! And I will shoot the nock off the arrow of anyone who tells me my bow isn't as accurate as a one-piece. I love two piece takedowns!
I am not a fan of 3 piece takedowns though.
Just my opinion, but a bow should not have screws. Too mechanical for me. :dunno: There definitely is a lot of merit, however, to the idea of being able to progressively increase your bow's poundage to accommodate your strength gains and development as an archer. That's where a three-piece shines. But still, I cannot stomach a bow with screws. :dunno:
I’m not trying to start an argument but I would strongly caution anyone from trying to make a 2 piece out of a bow that isn’t properly reinforced for a 2 piece.
Most 1 piece bows aren’t strong enough as is to be made into a 2 piece.
I would hate to see someone get hurt! Or destroy a perfectly good bow
-
The elm and Osage in my bow riser isn't any stronger than it would be in a one piece. In fact, with the brass and steel, I would say it is even stronger.
I do want to clarify something however, because I should have been more specific. I would never suggest this for a bow that is not straight grip hill style! My god, there is a wide variety of longbows out there and a lot of them with riser/grip styles whose integrity would be compromised by a structural modification (this includes wud's recurve!).
My god, I don't know what I was thinking. It did cross my mind that his longbow may not be a straight grip/hill style, but I REALLY should have mentioned it: With the grip style of many bows, this would be a complete disaster, and it was negligence on my part to leave it for anyone reading to decide whether their bow is suitable for modification. I should have been more clear.
-
Do also have a 21st Century Style LB by John, but don't think getting that cut to make two piece is in the cards either. Best to just squirrel away the acorns to get a new bow.
-
I'd invest in a good ilf riser and upgrade limbs incrementaly. I just bought Epic 15" from Mike at dryad and couldn't be happier with it. Ilf allows such a variety with limbs in weight and performance. I own a pair of medium samick Extreme BF limbs that make a 58" bow with an 15" riser that is comfortable to shoot at my 29" draw.
-
Thanks all for the words of advice and encouragement.
So, to clarify a few things:
I'm not able to view the classifieds here. I have been looking at AT and Stickbow occasionally and my local CL but nothing has come up that has caught my eye enough to spend any money.
My current bow has a pistol grip and I wouldn't be inclined to cut it. I like her as is. Neat suggestion. If I went that way, I'd send it to the bowyer to do for me. I'm handy but I wouldn't feel comfortable taking a shot at it.
I am very seriously considering an ILF riser. For some reason, the Hoyt offering has really caught my eye (the Satori) but she's pricey. IF I do anything like that it will be after the new year. This isn't the time of year to spend on me (unless I'm buying parts for my match pistol, but that's another story).
Thanks again for all the encouragement.
-
I own a Satori 17" and like it a lot. The grip is comfortable for my style of shooting (extended wrist). I like the riser for stationary hunting and target shooting because it is quite heavy. Also the tuneability is great.
-
I own a Satori 17" and like it a lot. The grip is comfortable for my style of shooting (extended wrist). I like the riser for stationary hunting and target shooting because it is quite heavy. Also the tuneability is great.
Precisely the size I am looking at. What limbs and poundage do you shoot? Are you running aftermarket limbs or the Hoyt limbs?
-
I've shot it with medium samick Extreme BF limbs 50#@29", medium TT Wood core (made by samick) 69#@29" and x-long Dryad Epic lb 52#@29". The mediums give a 60" bow lenght and are a pleasure to shoot, I dont notice any stacking at my draw. I only bought the riser since I already had good limbs so I have not shot the Hoyt limbs.
-
I've shot it with medium samick Extreme BF limbs 50#@29", medium TT Wood core (made by samick) 69#@29" and x-long Dryad Epic lb 52#@29". The mediums give a 60" bow lenght and are a pleasure to shoot, I dont notice any stacking at my draw. I only bought the riser since I already had good limbs so I have not shot the Hoyt limbs.
Thank you very much.