Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Mad Max on September 06, 2019, 02:59:43 PM

Title: 60" Recurve 1 Piece
Post by: Mad Max on September 06, 2019, 02:59:43 PM

I'v made a few of these but this one has a smaller radius on the recurve tip.
First one off the form.
It came in heavy and the tip wedge on one end slipped side ways @ the  zero end and now it has a permanent limb twist. :smileystooges:
I will try to get a full draw to find out the poundage.

(https://i.imgur.com/u2YUToK.jpg)

(https://i.imgur.com/arBDFgd.jpg)

.525 at the nocks and 1.5 about 2" into the fades
(https://i.imgur.com/hjUl11Q.jpg)

Title: Re: 60" Recurve 1 Piece
Post by: Flem on September 06, 2019, 03:12:14 PM

You could call that your handlebar mustache model :thumbsup:
That riser looks massive in relation to the limbs.

Title: Re: 60" Recurve 1 Piece
Post by: Forwardhandle on September 06, 2019, 03:22:37 PM

Very cool looking bow , looks fast just sitting there  :thumbsup:

Title: Re: 60" Recurve 1 Piece
Post by: Mad Max on September 06, 2019, 03:26:13 PM

26" long riser

I forgot
Stabilkore is some really good stuff.

Title: Re: 60" Recurve 1 Piece
Post by: Mad Max on September 06, 2019, 03:31:53 PM

It gets cut back like this.

(https://i.imgur.com/pzLhqV1.jpg)

Title: Re: 60" Recurve 1 Piece
Post by: Crooked Stic on September 06, 2019, 05:19:21 PM

Yes will never build another curve without Stablecore

Title: Re: 60" Recurve 1 Piece
Post by: Flem on September 06, 2019, 09:27:54 PM

Thats some pretty exceptional layout you got going on those risers. Really nice looking! :thumbsup:

Title: Re: 60" Recurve 1 Piece
Post by: Mad Max on September 06, 2019, 10:15:47 PM

x2 stic
yea I like to make some fancy ones every now and then.

Title: Re: 60" Recurve 1 Piece
Post by: Bvas on September 07, 2019, 09:54:29 AM

Those are sharp Mark :thumbsup:

Title: Re: 60" Recurve 1 Piece
Post by: Roy from Pa on September 07, 2019, 10:38:59 AM

I guess it's ok:)

Title: Re: 60" Recurve 1 Piece
Post by: razorsharptokill on October 16, 2019, 01:51:00 PM

Wow! Those are nice!