Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Japes4 on August 05, 2019, 08:26:51 PM

Title: 3 Piece Takedown Limb Help
Post by: Japes4 on August 05, 2019, 08:26:51 PM

Hello all,

Attempting my first 3 piece takedown longbow. Everything was going great until tonight, when I had a brain fart and drilled the alignment pin hole on the wrong side of the limb  :banghead:. My question is, can I “fix” this by filling the hole with epoxy or an epoxy/plug combo and then re-drill on the correct side?  I’m hoping this will work and I dont have to start a new limb. Any help is appreciated.

Title: Re: 3 Piece Takedown Limb Help
Post by: kennym on August 05, 2019, 09:19:28 PM

Yep or just put an overlay on the face of limb...

Title: Re: 3 Piece Takedown Limb Help
Post by: Crooked Stic on August 05, 2019, 09:54:33 PM

If it is in the right place just drill all the way thru. And overlay the front on both limbs.

Sent from my SM-T550 using Tapatalk