Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Crooked Stic on July 17, 2019, 12:39:11 PM

Title: Bezels and Washers
Post by: Crooked Stic on July 17, 2019, 12:39:11 PM

Ok Binghams has them for $10 a pair. Anybody know of any place cheaper? Used to get them half that price and the maker retired.

Title: Re: Bezels and Washers
Post by: Roy from Pa on July 17, 2019, 12:44:15 PM

Ya gots a pm there spanky..

Title: Re: Bezels and Washers
Post by: kennym on July 17, 2019, 01:21:55 PM

All I have is kits for 16 with two pins and the other stuff to bolt her up

Title: Re: Bezels and Washers
Post by: jess stuart on July 17, 2019, 02:28:00 PM

I have searched too.  I think they are called countersunk washers but haven't found the correct size yet.  I'll be watching and hoping.

Title: Re: Bezels and Washers
Post by: OkKeith on July 17, 2019, 04:35:05 PM

I guess big toilet washers won't work? :)

OkKeith

Title: Re: Bezels and Washers
Post by: Roy from Pa on July 17, 2019, 04:57:47 PM

Sure they do, just ask ole Kenny...

Title: Re: Bezels and Washers
Post by: Flem on July 17, 2019, 06:26:50 PM

Those "bezels" look a lot like female spherical washers. Pretty common and cheap.

Title: Re: Bezels and Washers
Post by: Mad Max on July 17, 2019, 06:53:35 PM

82 degrees countersunk hole
the only ones out there are for Archery T/D.
Not easy to find the guy that makes them for small quantities, and you need the plastic cushion too.
Easier to buy from our Sponsor's  :bigsmyl:

Title: Re: Bezels and Washers
Post by: Crooked Stic on July 17, 2019, 07:41:16 PM

I have a 5/16s counter sink tool and have a couple from phenolic A real PIA. but they would work. You could use brass toilet washers with button head bolts  :laughing:

Title: Re: Bezels and Washers
Post by: Flem on July 17, 2019, 07:48:58 PM

Not hard to find 120deg countersunk machine screws.
I don't make take-downs, but I do like having options.

Title: Re: Bezels and Washers
Post by: Tim Finley on July 18, 2019, 11:22:16 AM

Dale Sthal has them .