Trad Gang

Main Boards => Trad History/Collecting => Topic started by: Frank Novak on April 10, 2019, 12:10:52 PM

Title: Bear mag screw size
Post by: Frank Novak on April 10, 2019, 12:10:52 PM

My mag riser has a stripped screw hole that holds the bracket to the riser. It will screw in when the bracket is off and just screwing into the riser. I think a longer screw the same size will work. Anyone know the screw size thread. Thanks, Frank Novak.

Title: Re: Bear mag screw size
Post by: Frank Novak on April 11, 2019, 10:12:34 AM

Found the correct size. 8-32 works perfect on my riser. Frank

Title: Re: Bear mag screw size
Post by: Frank Novak on April 19, 2019, 09:46:26 AM

Something didn't seen quite right so I checked on the screw size again and 6-32 thread is the correct size. This is for the latch bracket into the riser. Just wanted to correct last post. Frank.

Title: Re: Bear mag screw size
Post by: detroitdd on October 27, 2020, 05:25:43 AM

The Kodiak magnum from grayling had a 5/16 X 24 thread.

Quote from: Frank Novak on April 11, 2019, 10:12:34 AM

Found the correct size. 8-32 works perfect on my riser. Frank

Title: Re: Bear mag screw size
Post by: M60gunner on October 28, 2020, 12:01:48 PM

 [ You are not allowed to view attachments ]