Trad Gang

Main Boards => PowWow => Topic started by: Gdpolk on January 29, 2019, 02:48:24 PM

Title: Most buoyant arrow material?
Post by: Gdpolk on January 29, 2019, 02:48:24 PM
I'm wanting to build arrows that can float and be retrieved by canoe from a lake. Naturally wood comes to mind but I could also use a carbon shaft and seal the ends to have a hollow tube that should float as well. Has anyone experimented with different types of arrow builds and found one to have superior buoyancy?
Title: Re: Most buoyant arrow material?
Post by: Hermon on January 29, 2019, 03:02:58 PM
I think wood and aluminum are your best bets.  Don't recall many, if any, carbons that float. 
Title: Re: Most buoyant arrow material?
Post by: Mark R on January 29, 2019, 03:12:40 PM
I think they all float if not extreme point weight, at least all mine do, be it wood or carbon. They are hollow.
Title: Re: Most buoyant arrow material?
Post by: arrow30 on January 29, 2019, 03:17:45 PM
the carbons I have shot into water floated with the knock at the surface, it depends on the weight of the point your shooting weather it stays up on the surface or goes to the bottom. the ones I shot had 300 grns up front, 100 grn insert, 200 grn blunt. the water was shallow enough that I didn't have to dive for them.
Title: Re: Most buoyant arrow material?
Post by: MCNSC on January 29, 2019, 04:27:43 PM
Aluminum will float, guess it does depend on point weight though and perhaps shaft diameter. Used to be a local 3D shoot that had a long distance shoot across a lake. Back then every body shot aluminum shafts. They would go out in a boat and pick up the floating shafts.
Title: Re: Most buoyant arrow material?
Post by: OkKeith on January 29, 2019, 04:40:51 PM
With carbon and alum... depends on whether the insert and nock ends are sealed. Some inserts have a threaded hole at the back to add threaded weights. The nocks on all my carbons are just friction fit.

OkKeith
Title: Re: Most buoyant arrow material?
Post by: reddogge on January 29, 2019, 06:36:39 PM
They all float.....point down. I haven't seen an arrow yet with a heavy enough point to sink one to the bottom. The nock end never comes near the water so doesn't have to be sealed as long as your point insert is tight
Title: Re: Most buoyant arrow material?
Post by: jbpharmd on January 29, 2019, 07:29:05 PM
Just curious, what are you trying to do? Ducks? Squirrels from trees overhanging creek?


Sent from my iPhone using Tapatalk
Title: Re: Most buoyant arrow material?
Post by: Hummer3T on January 29, 2019, 07:53:17 PM
Fill carbon with round foam that is used for screen door...perfect size.
Title: Re: Most buoyant arrow material?
Post by: Gdpolk on January 29, 2019, 10:02:05 PM
Quote from: jbpharmd on January 29, 2019, 07:29:05 PM
Just curious, what are you trying to do? Ducks? Squirrels from trees overhanging creek?


Sent from my iPhone using Tapatalk
Title: Re: Most buoyant arrow material?
Post by: M60gunner on January 29, 2019, 11:20:02 PM
Guess we shoot over the wrong pond. Waiting for the one at the range to dry up so I can retrieve my wife's arrows from last 3D. No, they didn't float, they sunk.
Title: Re: Most buoyant arrow material?
Post by: Jon Stewart on January 29, 2019, 11:32:01 PM
My thoughts would be old microflites or cedar shafts