Post by: Garman on January 04, 2019, 05:52:11 PM
Post by: skeaterbait on January 04, 2019, 06:26:12 PM
Post by: Bvas on January 04, 2019, 08:11:35 PM
To the best of my knowledge, you only want to sand it enough to give a good gluing surface, not down to wood.Skeeter, put the bottle down. He said belly side :biglaugh:
Post by: skeaterbait on January 04, 2019, 08:14:05 PM
Post by: kennym on January 04, 2019, 08:15:56 PM
You have to scuff the glass so the finish will stick to it, and some folks adjust weight slightly by sanding a bit more. Go easy...
Got some pics?
Post by: Garman on January 04, 2019, 08:17:52 PM
Post by: Garman on January 04, 2019, 08:19:30 PM
Post by: Roy from Pa on January 04, 2019, 08:57:15 PM
LMAO
:laughing:
Post by: Bvas on January 04, 2019, 09:04:37 PM
[ You are not allowed to view attachments ]
[ You are not allowed to view attachments ]
Post by: Shredd on January 04, 2019, 09:16:28 PM
Post by: Garman on January 04, 2019, 09:44:52 PM
Garmin, I think this is what you are asking about. This is the first bow that I removed belly material on the tips. Been shooting it nearly a year now with no ill effects. Next one I plan to remove even more. I have heard (and mostly believe), any material beyond string grooves is just excess weight. I like to leave a little something out there as a buffer for the bangs and clangs that can and will happen to a huntin bow.
Yes thanks bvas
Post by: Garman on January 05, 2019, 10:03:41 AM
Here is a photo of it so far...still learning how to add photo from phone
Post by: Shredd on January 05, 2019, 11:04:30 AM
Post by: Garman on January 05, 2019, 11:16:30 AM
Post by: Forwardhandle on January 05, 2019, 10:01:54 PM