Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: Mark Hedges on March 29, 2008, 08:48:00 AM

Title: shaft length of .600 spine carbons?
Post by: Mark Hedges on March 29, 2008, 08:48:00 AM
does anybody make a carbon arrow with a spine of around .600 in long 31"+ length?  This would be for target shooting only. So far I have found eastons redline arrows which I think are 31" max at .600 spine but they are kind of expensive.

Thanks,

Mark
Title: Re: shaft length of .600 spine carbons?
Post by: RamiusEng on March 29, 2008, 09:01:00 AM
Easton ST EPIC 600.  They come in 30 3/8" shafts.  Is this the kinda thing you were looking for?
Title: Re: shaft length of .600 spine carbons?
Post by: Shawn Leonard on March 29, 2008, 09:28:00 AM
GT Entrada as well, I believe they come 32"s. Shawn
Title: Re: shaft length of .600 spine carbons?
Post by: wapiti on March 29, 2008, 11:10:00 AM
Easton ST Epic 600. Fly very well from my Whip with 125 grain point. 52#@28"
Title: Re: shaft length of .600 spine carbons?
Post by: R H Clark on March 29, 2008, 11:35:00 AM
Beman ICS Energy are the same as Redline except .006 straight and $60 a dozen.
Title: Re: shaft length of .600 spine carbons?
Post by: Mark Hedges on March 29, 2008, 01:12:00 PM
thanks I'll check out those bemans. The gold tip shafts are 30" for 600 and 500 and 32" for stiffer.
Title: Re: shaft length of .600 spine carbons?
Post by: Cherokee Scout on March 30, 2008, 09:32:00 PM
Gold Tip Entrada 600s are 30.5" from the throat of the nock.
Text only | Text with Images