Trad Gang

Main Boards => PowWow => Topic started by: Bldtrailer on September 11, 2018, 06:56:45 PM

Title: Silvertips take down vs 1pc
Post by: Bldtrailer on September 11, 2018, 06:56:45 PM
Ok what's the difference other than being able to take down or change limbs?  Is one smoother , less weight  , noise/vibration 
Title: Re: Silvertips take down vs 1pc
Post by: WVFarrier on September 11, 2018, 08:02:30 PM
2 biggest advantages is that a takedown can be taken apart for easier storage or transport and if you damage a limb it can be replaced.  Ive always found one piece bows shot better when compared to their takedown counterparts but thats probably just me
Title: Re: Silvertips take down vs 1pc
Post by: Walt Francis on September 11, 2018, 08:54:36 PM
My thoughts based on having/had several three pieces,  two piece (longbow), and one piece Shafers. The three pieces, as mentioned above,  are more versatile and the added mass weight are more accurate for most people.  The one pieces are usually a little lighter in total weight,  smoother drawing,  and for me,  just look better.  The two piece has the best of both, versatile for travel,   more weight, accurate,  smoother drawing,  and most of all they look like a bow.

Just might opinion.  :goldtooth:
Title: Re: Silvertips take down vs 1pc
Post by: Matt Quick on September 11, 2018, 09:27:48 PM
I agree with Walt. I've had several of both and always shot the TD better. I think the added mass weight in the TD was the reason.
Title: Re: Silvertips take down vs 1pc
Post by: David McLendon on September 11, 2018, 10:25:06 PM
I used to have nothing but one piece bows, but when airlines started really gouging for baggage and size I switched to takedowns and now that's all that I own. I can pack two T/D recurves in separate bags  and be covered if one gets lost. I do like the added weight of the fast flight T/D Schafers, the Dymondwood is heavier, of course you will get that in a FF one piece as well.
Title: Re: Silvertips take down vs 1pc
Post by: McDave on September 11, 2018, 10:44:37 PM
A one piece can be designed for a longer draw length on a short bow, because the risers on one piece bows are shorter than those on three piece bows.  If you care about that, you can get a two piece bow with as long a draw length as the same length one piece bow.  Some three piece bows are built with very short risers to do almost the same thing, but they can't be built with as short a riser as a one or two piece.  I prefer longer length bows anyway, so my favorite bows are three piece takedowns, because I find them easier to shoot accurately, for the reasons mentioned.  I do have a one piece Schaffer longbow that I keep for longbow competitions that require a one piece longbow.