Trad Gang

Main Boards => PowWow => Topic started by: Boognish on July 07, 2018, 06:10:53 AM

Title: Installing a clicker
Post by: Boognish on July 07, 2018, 06:10:53 AM

I’ve had trouble adding a clicker on my bow for my draw length. It either clicks too soon or it doesn’t click at all. Is there a magic remedy for this that I’m overlooking? Thanks

Title: Re: Installing a clicker
Post by: McDave on July 07, 2018, 09:39:14 AM

I’ve seen pictures of them installed high on the limbs.  I prefer to install them just above the riser on the non-working part of the limbs.  I think there’s less likelihood of the clicker interfering with the operation of the limbs that way, and it also makes it easier to adjust, because more movement is required to make it click, making the adjustment a little less critical.  I’ve never got it exactly right the first time, though, and always have to go up or down a few notches in the chain after I start shooting it.

Title: Re: Installing a clicker
Post by: PresTex on July 07, 2018, 09:56:09 AM

These two links should help.

https://youtu.be/JP_1i8Htls4

https://youtu.be/LJTdgBw3sIs




Sent from my iPhone using Tapatalk