I just ordered my first file from 3 Rivers to sharpen some 3 blade heads with. I have never used a file for this or any other purpose. What type of chalk do I use to "chalk" the file before using? Also, do the "teeth" point away from the handle or back at it? Any help is appreciated. Thank you.
I use doller store school/sidewalk chalk. A files teeth are angled so the file does its work on the away stroke.
I've been told that chalking keeps the spaces between teeth from filling with magnectically charged metal filings, thus keep the file sharper longer. Chalkboard chalk or turkey chalk work fine. Teeth point away from handle so that the cutting is done on forward stroke, opposte a hacksaw. But be careful ... it's amazing how fast you can shave 10gr or more off a broadhead with a sharp file. Just get the blades even and burr-free, then switch to a stone or diamond bar. Darn, I was going to walk out to the shop to check on something for you, but am trapped in my cabin while four big tom turkeys graze beneath our bird feeder. Spring is almost here! Dave
Hacksaws also cut on the push stroke.
Coping saws and traditional Japanese saws cut on the pull stroke.
The chalk is to keep filings from sticking between he cutting edges of the file. They stick because they bind in the groove, not because they are magnetic. Aluminum is the worst for sticking and it's not magnetic.
If you want all your Files and Rasps to stay sharp, wrap them in a shop towel or rag, no oily rags thou. This way they won't get dull by touching other metal tools around your shop bench....ONE SHOT... :) :) :) :D :D (OLD RETIRED TOOL&DIE MAKER TIP)
Thanks to all...that was quick! I think I have some chalk laying around the house now that you mention it (kids love that sidewalk chalk). I will keep it wrapped also. Thanks.
I use the chalk from my turkey calls.
I just rub a magnet over the file and that gets all the cuttings out.
Chalking or soapstoning a file keeps "pins" from embedding themselves in the files grooves, between its cutting edges.
This prevents gouges being dug in the workpiece, thusly, a better finish.
Keep your files clean, wrap them in cardboard, rag, or whatever to keep them from being beaten up whilst in the tool box.
Also, keep the file FREE of oil. Oil makes the file "slide" on the workpiece, instead of cutting cleanly. (Degrease your b/heads befroe filing on them.)
A quality file will give years of good service if it is looked after, so buy the best you can find. (Grobet, Nicholson) They are not really expensive.