Text only | Text with Images

Trad Gang

Main Boards => PowWow => Topic started by: MJB on March 13, 2008, 08:06:00 PM

Title: ZEPHYR SASQUATCH Screw-In
Post by: MJB on March 13, 2008, 08:06:00 PM
Anyone know if they are available in 135 / 140 grn with bleeders being used ?
Thanks
Title: Re: ZEPHYR SASQUATCH Screw-In
Post by: BodarkOkie on March 13, 2008, 08:12:00 PM
Mike,

I don't think the Sasquatch goes that low.  It's around 140 grains without the BH adaptor.

Gene
Title: Re: ZEPHYR SASQUATCH Screw-In
Post by: Terry Green on March 13, 2008, 08:14:00 PM
They weigh 140 grains with the bleeders.....then you have to add the weight of the adapter that you choose to that.
Title: Re: ZEPHYR SASQUATCH Screw-In
Post by: MJB on March 13, 2008, 08:18:00 PM
Could the long adapter be used with them ? Probably have to use it as a two blade then.
THANKS Gene    :thumbsup:  THANKS Terry   :thumbsup:
Title: Re: ZEPHYR SASQUATCH Screw-In
Post by: BodarkOkie on March 13, 2008, 08:20:00 PM
Haven't tried the ones with the bleeder slots.  I "assume" that
the bleeders wouldn't work with the long adaptors.  

But, you're going to end up with more weight that what you
indicated at the beginning of the thread.

Gene
Title: Re: ZEPHYR SASQUATCH Screw-In
Post by: MJB on March 13, 2008, 08:27:00 PM
Didn't think of that    :knothead:  Might look into the Scirocco Screw-In
Title: Re: ZEPHYR SASQUATCH Screw-In
Post by: Terry Green on March 13, 2008, 08:40:00 PM
You have to use a 'short' adapter for the bleeders...OR, you have to 'slot' a long adapter.
Text only | Text with Images