Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: PopeandYoung_51 on January 21, 2018, 05:57:00 PM

Title: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: PopeandYoung_51 on January 21, 2018, 05:57:00 PM

I was using Home Depot's Home Decorators Collection Vertical Toast 5/8 in. Thick x 5 in. Wide x 38-5/8 in. Length Solid Bamboo Flooring for my limb cores but it's been discontinued. Does anyone know of another place to purchase this product, or a similar product?
Thank You!
Coltin

Title: Re: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: KenH on January 21, 2018, 07:38:00 PM

Lumber Liquidators?  Any Flooring supplier should have a similar product.

Title: Re: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: PopeandYoung_51 on January 21, 2018, 09:02:00 PM

Lumber Liquidators have also discontinued "their" vertical bamboo flooring line.

Title: Re: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: Crooked Stic on January 21, 2018, 09:14:00 PM

web page (http://www.nwbamboo.com/flooring.html)  
Give these guys a call. They have boards 8"x 7/8"x 6 feet. $30

Title: Re: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: beachbowhunter on January 22, 2018, 12:23:00 PM

Crooked is right on. Go with the vertical stair tread. No need to mess around with flooring.

Title: Re: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: JamesV on January 23, 2018, 09:09:00 PM

The vertical stair tread appears to be two ply. I would not trust the factory joint. Saw down the factory joint and you are good to go, with two pieces. Also look at the vertical riser material, it is one ply and could be a better buy. Be sure to get the unfinished which ever you use.

James

Title: Re: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: kennym on January 23, 2018, 09:16:00 PM

Yes I use the riser. Last I got he sent 8’ which is a waste making 36” Lams

Title: Re: Where to buy Vertical Boo Flooring 5/8"x5"x38.625"
Post by: PopeandYoung_51 on January 24, 2018, 10:19:00 PM

Thanks for the input guys!