Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: David Flanrey on July 03, 2017, 05:19:00 PM

Title: Shop tools and rust.
Post by: David Flanrey on July 03, 2017, 05:19:00 PM

Hey bowyers, I just built a new shop and I have bought some new tools to go in it.  What do you guys use to prevent rust on the unpainted areas?  Like on band saw and table saw tops.  Want to take as good care as I can.  Let's hear some ideas.
Thanks,David

Title: Re: Shop tools and rust.
Post by: Roy from Pa on July 03, 2017, 06:06:00 PM

Wax them often with a piece of wax paper. Makes wood glide across them like on ice.

Title: Re: Shop tools and rust.
Post by: Bowjunkie on July 03, 2017, 06:22:00 PM

In addition to coating the work table surfaces, maintain a dry atmosphere with a dehumidifier... it's good for bow wood, other metal parts, and keeps mold and mildew away too.

Title: Re: Shop tools and rust.
Post by: Mad Max on July 03, 2017, 06:27:00 PM

Quote

Originally posted by Bowjunkie:
In addition to coating the work table surfaces, maintain a dry atmosphere with a dehumidifier... it's good for bow wood, other metal parts, and keeps mold and mildew away too.

Mine run's 24/7

Title: Re: Shop tools and rust.
Post by: wood carver 2 on July 03, 2017, 08:43:00 PM

There is a spray on protection called Top Cote. It protects the iron or steel surfaces and won't contaminate wood. It also reduces friction.
Dave.

Title: Re: Shop tools and rust.
Post by: skeaterbait on July 03, 2017, 08:52:00 PM

I use Johnson's paste wax.

Title: Re: Shop tools and rust.
Post by: David Flanrey on July 03, 2017, 10:11:00 PM

All great advise.  Didn't think about the humidifier.  Will get one.  Thanks guys!

Stocked up with a new 14" band saw, 10" table saw, edge sander, 8" jointer and a 13" planer all Grizzly and a Mikita 12" miter saw.  Hoping to keep them in good working order.

Title: Re: Shop tools and rust.
Post by: bigbob2 on July 04, 2017, 01:08:00 AM

I am a little concerned the wax might pollute the wood and interfere with glue ups? Just guessing though.

Title: Re: Shop tools and rust.
Post by: Roy from Pa on July 04, 2017, 08:25:00 AM

Ya need to buy the wax free wax..

Title: Re: Shop tools and rust.
Post by: Bowjunkie on July 04, 2017, 09:02:00 AM

Bostik GlideCote is what you want. It seals tool tables and blades from rust, reduces friction, doesn't build up, and won't affect glue joints or wood finishes like oils or waxes.

Title: Re: Shop tools and rust.
Post by: on July 04, 2017, 09:28:00 AM

Quote

Originally posted by Roy from Pa:
Ya need to buy the wax free wax..

Roy...  Where can you get that stuff?? Is it in the 'board stretcher' aisle??

Title: Re: Shop tools and rust.
Post by: Wolftrail on July 04, 2017, 11:36:00 AM

I'm inclined to use W-40 or equivalent it penetrates the micro pores in the metal and it has rust inhibitors, wax wont do that.  I used wax on my patio door it lasts about a month spray lubes triple that time.

Title: Re: Shop tools and rust.
Post by: macbow on July 04, 2017, 02:53:00 PM

I use the Jhonson's paste wax.
Rub in wipe off not enough left to contaminate wood.

Title: Re: Shop tools and rust.
Post by: David Flanrey on July 04, 2017, 07:59:00 PM

Ordered some Glidecote.  Ill get a dehumidifier which will help keep my wood dry also.  Glad I turned to the Gang for help.  Thanks
   :thumbsup:

Title: Re: Shop tools and rust.
Post by: M60gunner on July 06, 2017, 12:58:00 AM

Years ago in San Diego I was looking around the house for something to use on a couple hand saws. Ended up using sunflower oil from wife's kitchen. Tried Olive oil as well but it stinks after awhile.
 WD-40 and such products can leave residues which your glue or finishes may not adhere to.

Title: Re: Shop tools and rust.
Post by: breazyears on July 06, 2017, 08:09:00 PM

car wax

Title: Re: Shop tools and rust.
Post by: Eric Krewson on July 07, 2017, 09:45:00 AM

If I notice a little rust on my equipment tables tops I give the area a light sanding with 400 grit and put a little oil on the table. I might have to touch things up about once every 5 years.

Title: Re: Shop tools and rust.
Post by: eflanders on July 12, 2017, 08:14:00 PM

Johnsons paste wax.  Make sure whatever version you get that it doesn't contain silicone.  Silicone will negatively affect your finished pieces.  WD40 IS NOT good to use as it dries out (W stands for water and D stands for dispersion). WD40 also contains silicone.

Title: Re: Shop tools and rust.
Post by: bamboo on July 21, 2017, 08:56:00 PM

http://www.rockler.com/zerust-no-rust-table-saw-cover

this one caught my eye--
 http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwiZpdWD15vVAhUCbz4KHRUaBugQFggiMAA&url=http%3A%2F%2Fwww.toolclad.com%2F&usg=AFQjCNHB8ltm97V8 bxIAy3__J8-MBDAB1A (http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwiZpdWD15vVAhUCbz4KHRUaBugQFggiMAA&url=http%3A%2F%2Fwww.toolclad.com%2F&usg=AFQjCNHB8ltm97V8bxIAy3__J8-MBDAB1A)

Title: Re: Shop tools and rust.
Post by: David Flanrey on July 25, 2017, 01:07:00 PM

Mike, I like your idea!!

I did buy a dehumidifier for my shop and treated the tools with Top Cote.

I should be completely moved in a couple more weeks.  Time to build some bows

Thanks for all the posts!!  I'll post some pics soon.  Have everything just sitting in shop right now.

Title: Re: Shop tools and rust.
Post by: bamboo on July 26, 2017, 06:13:00 PM

wax and a cover-------and dehumidified--should be fine anywhere!