Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: Mitch Edwards on September 07, 2016, 08:56:00 PM

Title: Glueing phenolic
Post by: Mitch Edwards on September 07, 2016, 08:56:00 PM

Well some of you might of seen my post about advice on a take down longbow riser. Problem is I got in a bit of a hurry and milled off part of the riser. Good news is it's good and flat lol. I got some scrap to glue back on but I'm not sure what the best glue would be for it. The riser is stiff enough it should have no flex so what's my best option?

Title: Re: Glueing phenolic
Post by: bamboo on September 07, 2016, 09:17:00 PM

EA -40

Title: Re: Glueing phenolic
Post by: kennym on September 07, 2016, 09:27:00 PM

Yep

Title: Re: Glueing phenolic
Post by: Mitch Edwards on September 07, 2016, 10:17:00 PM

Alright then looks like I'll be gettin some. You guys got a favorite supplier?

Title: Re: Glueing phenolic
Post by: KenH on September 08, 2016, 09:53:00 AM

Bingham's since you can buy a Pint Kit from him, for about $20 rather than mass quantities for lotsa bucks.

Title: Re: Glueing phenolic
Post by: Mitch Edwards on September 08, 2016, 10:33:00 AM

Ya I don't need much. The joint is about 6"X1 1/2"