Trad Gang

Main Boards => The Bowyer's Bench => Topic started by: RedShaft on July 20, 2016, 09:33:00 AM

Title: Youth board bow question.
Post by: RedShaft on July 20, 2016, 09:33:00 AM

I trying to build my boy a few board bows. This is my first attempt ever at building a bow of any kind. So I'm using the red oak 1/4" typical 48" long job. Used stacked cherry as the handle and tips.
Do I need to back this bow?
If I do, does it increase draw weight?

When I file nock grooves. Should I only file the sides? Or should I file it like atypical nock groove? Thanks guys!

Title: Re: Youth board bow question.
Post by: monterey on July 20, 2016, 10:03:00 AM

I have made more of those than I can count.  It's a great and economical way to get a kid into a bow.  Most of the time involved is waiting for the glue to dry.   :)  

If you pick the slats carefully, there is no need to back them.  That said, I have backed quite a few of them just because my grandkids all have cute little faces and I want them to stay that way!

I have backed them with fiberglass Auto body mat and epoxy, cotton duck and wood glue, rawhide, and brown paper shopping bags.  None of these backings improved performance.  In fact, they hurt performance due to the fact that they do no work but add weight to the limbs. They all work and the paper bag is the lightest, easiest and most economical so that is what I have settled on.

A pyramid is the best design for the material.  Bring the limbs to points at the tips, the narrower the better. Gluet a piece of scrap from the limbs over the tips and file a string groove across the top of the overlay, but not into the side of the limb.

That's the way I settled on doing these and it works fine.  There are some pics somewhere and I'll post some if I find them.

Title: Re: Youth board bow question.
Post by: macbow on July 20, 2016, 11:25:00 AM

Pretty much the same as Monterey.
Also built a,buch of these now moved to bamboo backed bows as the GK's grew.

Another backing choice is the camo looking screen.

Most of these need little tillering.

Title: Re: Youth board bow question.
Post by: RedShaft on July 20, 2016, 07:14:00 PM

Okay I got it pretty much all done.
Turned out good. Strung it up slowlllyyyyy.... Flung a few arrows. All seems well.
I just stained it.

So now what? Linseed oil? Any suggestions on a finish

Title: Re: Youth board bow question.
Post by: macbow on July 20, 2016, 08:46:00 PM

I mostly just use either Bullseye spray shellac or spray poly.

Title: Re: Youth board bow question.
Post by: monterey on July 20, 2016, 09:55:00 PM

Something that will give good protection from moisture.

Course any moment now Roy is gonna tell that without pictures It didn't happen.   :biglaugh: