Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: litoduk on April 09, 2016, 02:18:00 AM
-
Hello friends.
I 'm thinking of buying a machine to make my laminations q worthwhile.I do not find in Spain planers sandpaper .
and the only thing q and found money for the laminations is PROXXON dh40 planer .It seems to be good ....
my question is anyone use it?
Conical laminations serve to make ?
worth it?
economically I can not spend more q esoso 400 / 500e .
P.S. I certainly used and seen q ceoilladoras giant bows to big business.
but another question the smooth finish that leaves the blades is not a inconbeniente for the resin ?
then by its smooth surface lest the bow delaminate .
Thank you!
http://www.axminster.co.uk/proxxon-dh-40-thicknesser-702064
http://www.proxxon.com/en/micromot/27040.php?list
:campfire:
-
http://www.axminster.co.uk/jet-10-20-plus-drum-sander-100459
Save some more money - this machine is what you want. :)
I don't advise buying a planer thicknesser for making lams.
-
thanks friend!!!!
buscare best in Spain to see if I can find such a machine .
and I'm afraid with the blades to break the thinnest part of the conical laminations.I also thought about buying a sander spindle 140e and triton brand .
modify a drawer in a horizontal manner to the sander lams .this is if I find what I want .
Thank you :)
-
Yoiu want a thickness SANDER, not a thicknes PLANER. Planer blades, even the best do not cut smooth enough with very thin wood.
-
thanks friends.
I'm working on the manufacture of the sander.
since not and found nothing cheaper than 1000e in the market and is too expensive for my pocket.I 'm turning my sander spindle in a machine for laminations.
I'll upload photos when the finish and my workshop is almost finished .