Trad Gang
Main Boards => The Bowyer's Bench => Topic started by: peanut39350 on January 16, 2016, 07:37:00 PM
-
a friend had an old Ben Pearson cougar he said i could have if i could get the twist out of the limbs. I have tried to twist them in the other direction with hot rags on the limb but can't get the twist out anybody got any tips on how to fix it
-
Step it up a little. Try to get it a little hotter with hot water, a hair dryer, or very careful use of a heat gun (my choice). Whatever you use, get it hot enough that you can barely, constantly hold on to it with your hand... keep checking it so you don't go too far. Move it slightly beyond where it needs to be (because it will spring back slightly) and block it there until it is completely cooled... on the INside... a couple hours. And then string it, work it, and see how you did.